As filed with the U.S. Securities and Exchange Commission on September 18, 2019.
Registration No. 333-232557
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
AMENDMENT NO. 3
SECURITIES ACT OF 1933
(Exact name of registrant as specified in its charter)
(State or other jurisdiction of
incorporation or organization)
(Primary Standard Industrial
Classification Code Number)
708 Third Avenue, 6th Floor
New York, New York 10017
Telephone: (646) 828-8258
(Address, Including Zip Code, and Telephone Number, Including Area Code, of Registrant’s Principal Executive Offices)
708 Third Avenue, 6th Floor
New York, New York 10017
Telephone: (646) 828-8258
(Name, Address, Including Zip Code, and Telephone Number, Including Area Code, of Agent For Service)
David Alan Miller, Esq.
Eric T. Schwartz, Esq.
The Chrysler Building
405 Lexington Avenue
New York, New York 10174
Telephone: (212) 818-8800
Spencer G. Feldman, Esq.
Olshan Frome Wolosky LLP
1325 Avenue of the Americas, 15th Floor
New York, New York 10019
Telephone: (212) 451-2300
Approximate date of commencement of proposed sale to the public: As soon as practicable after the effective date of this registration statement.
If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933 check the following box. [ ]
If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. [ ]
If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. [ ]
If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. [ ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:
|Large accelerated filer [ ]||Accelerated filer [ ]|
|Non-accelerated filer [X]||Smaller reporting company [X]|
|Emerging growth company [X]|
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act. [ ]
CALCULATION OF REGISTRATION FEE
|Title of Each Class of Security Being Registered||Proposed
|Common stock, par value $0.01 per share||$||23,000,000||$||2,787.60|
|(1)||Estimated solely for the purpose of calculating the registration fee in accordance with Rule 457(o) of the Securities Act.|
|(2)||Includes shares of common stock subject to an over-allotment option granted to the representative of the underwriters. Pursuant to Rule 416, there are also being registered an indeterminable number of additional securities as may be issued to prevent dilution resulting from stock splits, stock dividends or similar transactions.|
The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, as amended, or until the Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to said Section 8(a), may determine.
The information in this prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any state where the offer or sale is not permitted.
|PRELIMINARY PROSPECTUS||Subject to Completion, dated September 18, 2019|
This is our initial public offering. The public offering price of our common stock is expected to be between $ and $ per share.
Prior to this offering, there has been no public market for our common stock. In connection with this offering, we have applied to list our common stock for trading on the NYSE American under the symbol “GBSG.” Although we expect our common stock to be listed on the NYSE American, there can be no assurance that an active trading market will develop.
Investing in our common stock involves a high degree of risk. See “Risk Factors” beginning on page 9 for a discussion of certain risks that you should carefully consider in connection with an investment in our common stock.
|Public offering price||$||$|
|Underwriting discounts (1)||$||$|
|Proceeds to us, before expenses||$||$|
|(1)||See “Underwriting” beginning on page 87 of this prospectus for additional information regarding the underwriting compensation.|
The underwriters may also purchase up to additional shares of common stock from us at the public offering price, less the underwriting discounts payable by us, solely to cover over-allotments, if any, within 45 days after the date of this prospectus.
We are an “emerging growth company” as defined in the Jumpstart Our Business Startups Act, or the “JOBS Act,” and as such, may elect to comply with certain reduced reporting requirements for this prospectus and future filings after this offering.
Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.
The underwriters expect to deliver the shares against payment on or about , 2019.
Aegis Capital Corp.
The date of this prospectus is , 2019
ABOUT THIS PROSPECTUS
Neither we nor the underwriters have authorized anyone to provide you with any information or to make any representations other than as contained in this prospectus or in any free writing prospectuses we have prepared. Neither we nor the underwriters take responsibility for, and provide no assurance about the reliability of, any information that others may give you. This prospectus is an offer to sell only the shares offered hereby, but only under circumstances and in jurisdictions where it is lawful to do so. The information contained in this prospectus is accurate only as of the date of this prospectus, regardless of the time of delivery of this prospectus or any sale of the common stock. Our business, financial condition, results of operations and prospects may have changed since that date.
No action is being taken in any jurisdiction outside the United States to permit a public offering of our common stock or possession or distribution of this prospectus in any such jurisdiction. Persons who come into possession of this prospectus in jurisdictions outside the United States are required to inform themselves about and to observe any restrictions about this offering and the distribution of this prospectus applicable to those jurisdictions.
Unless otherwise indicated, data contained in this prospectus concerning the glucose monitoring market and the other markets relevant to our operations are based on information from various public sources. Although we believe that this data is generally reliable, such information is inherently imprecise, and our estimates and expectations based on these data involve a number of assumptions and limitations. As a result, you are cautioned not to give undue weight to such data, estimates or expectations.
We have proprietary or licensed rights to trademarks used in this prospectus, including “Glucose Biosensor.” Solely for our convenience, trademarks and trade names referred to in this prospectus may appear without the “®” or “™” symbols, but such references are not intended to indicate, in any way, that we will not assert, to the fullest extent possible under applicable law, our rights or the rights to these trademarks and trade names. We do not intend our use or display of other companies’ trade names, trademarks or service marks to imply a relationship with, or endorsement or sponsorship of us by, any other companies. Each trademark, trade name or service mark of any other company appearing in this prospectus is the property of its respective holder.
INDUSTRY AND MARKET DATA
This prospectus contains estimates, projections and other information concerning our industry, our business, the science of our products and the markets for our products, including data regarding the incidence of certain medical conditions and the scientific basis of our products. We obtained the industry, science, market and similar data set forth in this prospectus from our internal estimates and research and from academic and industry research, publications, surveys, and studies conducted by third parties.
The content of the above sources, except to the extent specifically set forth in this prospectus, does not constitute a portion of this prospectus and is not incorporated herein. Information that is based on estimates, forecasts, projections, market research, scientific research, or similar methodologies is inherently subject to uncertainties and actual events or circumstances may differ materially from events and circumstances that are assumed in this information. While we believe that the data we use from third parties are reliable, we have not independently verified the accuracy or completeness of the data. Further, while we believe our internal research is reliable, such research has not been verified by any third party. You are cautioned not to give undue weight to any such information, projections, and estimates.
TABLE OF CONTENTS
|CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS||33|
|USE OF PROCEEDS||34|
|MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION||38|
|MATERIAL UNITED STATES FEDERAL INCOME TAX CONSEQUENCES TO NON-U.S. HOLDERS||79|
|DESCRIPTION OF OUR SECURITIES||83|
|SHARES ELIGIBLE FOR FUTURE SALE||86|
|WHERE YOU CAN FIND MORE INFORMATION||91|
|INDEX TO FINANCIAL STATEMENTS||F-1|
Investing in our common stock involves a high degree of risk. You should consider carefully the risks and uncertainties described below, together with all of the other information in this prospectus, including the consolidated financial statements and the related notes included elsewhere in this prospectus, before deciding whether to invest in shares of our common stock. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. If any of the following risks actually occurs, our business, financial condition, results of operations, and future prospects could be materially and adversely affected. In that event, the market price of our common stock could decline, and you could lose part or all of your investment.
Risks Related to Our Financial Condition and Capital Requirements
We are subject to the risks associated with new businesses.
We were formed in December 2016 as a new business with a plan to commercialize our licensed technology. Our limited operating history may not be adequate to enable you to fully assess our ability to develop and market the SGT and other tests based on the Biosensor Platform, achieve market acceptance of the SGT and such other tests and respond to competition. Our efforts to date have related to the organization and formation of our company, strategic planning, product research and development and preparation for commencing regulatory trials, and have depended on support from the Licensor and its affiliates. We have not yet generated revenue, and we cannot guarantee we will ever be able to generate revenues. Therefore, we are, and expect for the foreseeable future to be, subject to all the risks and uncertainties, inherent in a new business focused on the development and sale of new medical devices and related software applications. As a result, we may be unable to further develop, obtain regulatory approval for, manufacture, market, sell and derive revenues from the SGT and the other products in our pipeline based on the Biosensor Platform, and our inability to do so would materially and adversely impact our viability. In addition, we still must optimize many functions necessary to operate a business, including expanding our managerial, personnel and administrative structure, continuing product research and development, and assessing and commencing our marketing activities.
Accordingly, you should consider our prospects in light of the costs, uncertainties, delays and difficulties frequently encountered by companies that have not yet commercialized their products or services, particularly those in the medical device and digital heath fields. In particular, potential investors should consider that there is a significant risk that we will not be able to:
|●||implement or execute our current business plan, or that our business plan is sound;|
|●||maintain our management team and Board of Directors;|
|●||determine that the technologies that have been developed are commercially viable;|
|●||attract, enter into or maintain contracts with, and retain customers; and|
|●||raise any necessary additional funds in the capital markets or otherwise to effectuate our business plan.|
In the event that we do not successfully address these risks, our business, prospects, financial condition, and results of operations could be materially and adversely affected.
We have incurred significant losses since inception and may not be able to achieve significant revenues or profitability.
Since our inception, we have engaged primarily in business development activities. We have financed our operations primarily through financing from private capital raising and support from our controlling stockholder, and have incurred losses since inception, including a net loss of $5,020,383 for the fiscal year ended June 30, 2018 and a net loss of $7,336,686 for the fiscal year ended June 30, 2019. We do not know whether or when we will become profitable. Our ability to generate revenue and achieve profitability depends upon our ability, alone or with others, to complete the development process of our products, including regulatory approvals, and thereafter achieve substantial acceptance in the marketplace for our products. We may be unable to achieve any or all of these goals.
Our current financial condition raises substantial doubt as to our ability to continue as a going concern.
Since inception, we have incurred losses and negative cash flows from operating activities. We do not expect to generate positive cash flows from operating activities until such time, if at all, that we complete the development process of our products, including regulatory approvals, and thereafter achieve substantial acceptance in the marketplace for our products. We incurred a net loss of $5,020,383 for the fiscal year ended June 30, 2018 and a net loss of $7,336,686 for the fiscal year ended June 30, 2019. At June 30, 2019, we had an accumulated deficit of $12,668,741, negative working capital of $3,977,138, current liabilities of $6,305,088 (of which $5,277,056 is the aggregate outstanding principal amount of convertible notes issued by our 99%-owned subsidiary GBS Pty Ltd that will convert to common stock upon the closing of this offering), and cash of $197,940. These factors may raise doubt about our ability to continue as a going concern. Our consolidated financial statements have been prepared on a going concern basis which contemplates the realization of assets and satisfaction of liabilities and commitments in the normal course of business. If we become unable to continue as a going concern, we may have to liquidate our assets and the values we receive for our assets in liquidation or dissolution could be significantly lower than the values reflected in our consolidated financial statements. Should we encounter a scenario whereby sufficient capital is not available, the two shareholders of our controlling stockholder have committed to provide sufficient financial assistance to us as and when it is needed for us to continue our operations until July 2020. See Note 1 to our consolidated financial statements for the fiscal year ended June 30, 2018 and Note 1 to our consolidated financial statements for the fiscal year ended June 30, 2019 included elsewhere in this prospectus.
Given our lack of revenue and our negative cash flow, we may need to raise additional capital, which may be unavailable to us or, even if consummated, may cause dilution or place significant restrictions on our ability to operate.
According to our management’s estimates, based on our budget and proposed schedules of development, approvals and organization, we believe, although there can be no assurances, that after this offering we will have sufficient capital resources to enable us to continue to implement our business plan and remain in operation for at least the next 30 months. We do not anticipate generating any revenues for at least 18 months, if at all, from the date of this offering, and our revenues will not immediately be sufficient to finance our ongoing operations. In addition, available resources may be consumed more rapidly than currently anticipated, and there can be no assurance that we will be successful in developing the SGT and generating sufficient revenue in the timeframe set forth above, or at all. We may also need additional funding for developing new products and services and for additional sales, marketing and promotional activities. Accordingly, we may need to seek additional equity or debt financing earlier than anticipated to provide the capital required to maintain or expand our operations.
We may raise additional capital through sales of equity securities or the incurrence of debt. See “—Risks Related to This Offering and the Ownership of Our Common Stock.” Except for commitments by the two shareholders of our controlling stockholder to provide sufficient financial assistance to us as and when it is needed for us to continue our operations until July 2020, we do not currently have any arrangements or credit facilities in place as a source of funds, and there can be no assurance that we will be able to raise sufficient additional capital on acceptable terms, or at all. If such financing is not available on satisfactory terms, or is not available at all, we may be required to delay, scale back or eliminate the development of business opportunities and our operations and financial condition may be materially adversely affected.
Risks Related to Our Business
The License Agreement with the Licensor, our controlling stockholder, which covers the license of the core technology used in our products, contains significant risks that may threaten our viability or otherwise have a material adverse effect on us and our business, assets and its prospects.
The License Agreement is limited to the APAC Region and includes the terms and related risks set forth below. We have no contractual rights to the intellectual property covered in the License Agreement other than as expressly set forth therein. Our plans, business, prospects and viability are substantially dependent on that intellectual property and subject to the limitations relating thereto as set forth in the License Agreement:
|●||The license granted to us is limited in territorial scope. The Licensor, of which we are currently a 99.1%-owned subsidiary, and which will continue to own a majority of our outstanding common stock immediately following this offering, granted us a license to its proprietary rights in the biosensor technology used in the Licensed Products solely in the APAC Region, and primarily to act as authorized party for obtaining regulatory approval and to manufacture (subject to being approved as an Authorized Supplier by the Licensor) for use in the APAC Region, and to promote, market, import, offer sell and distribute the Licensed Products in the APAC Region. We may not exploit or seek to exploit any rights in respect of the Licensed Product outside of the APAC Region through any means, including digitally or online where the end user is not physically resident in the APAC Region. Accordingly, to the extent that such users are prohibited, we will be unable to realize any commercialization from such users and ensure that such users do not do business with us, even as such commercialization and business might be appropriate, related, synergistic or enhanced by our operations. In addition, we may be responsible for costs and other liabilities that might arise to the extent that users outside the APAC Region obtain such access, and may incur costs to comply with these prohibitions. Further, the non-coverage of digital or online use for users not physically in the APAC Region may constitute a material limitation on our ability to freely conduct business digitally, online or through any other medium that may reach outside of the APAC Region. This limitation may have a material adverse effect on our marketing, sales, operational and other business efforts.|
After the receipt of regulatory approval in a jurisdiction, we may be required to pay the Minimum Royalty with respect to such jurisdiction regardless of the actual amount of sales by us of Licensed Products. Accordingly, although the Minimum Royalty is based on our projected sales in each such jurisdiction, and although the determination of the Minimum Royalty is subject to agreement between us and the Licensor as to certain parameters, as described elsewhere in this prospectus, with disputes generally resolved by an independent third party, we could be obligated to pay royalties even though we have generated no or limited revenue. Such payments could materially and adversely affect our profitability, and could limit our investment in our business.
|●||The Licensed Products include only products that are supplied by an Authorized Supplier. Accordingly, we will not have unfettered right to select our suppliers, regardless of whether an unauthorized supplier could provide products on better pricing, delivery, quality or other terms, thus potentially materially and adversely impacting those aspects of our business, economies, profitability and prospects.|
|●||We are required to collect and anonymize demographic information about the end users of the Licensed Products, as well as data acquired from the Licensed Products. The data collection and retention may be expensive in cost, resources, legal and regulatory compliance and other ways, none of which costs can be quantified at this time. Further, changing regulations with respect to medical and similar such data may make such compliance beyond the scope of our capabilities. Any failure to comply may result in financial liability, as well as reputational harm.|
|●||The license is non-transferable, non-assignable and non-sublicensable, except that the Licensor will in good faith consider any request by us for any sublicense. The Licensor is not obligated to agree to any such sub-license. These restrictions may limit our flexibility to structure our operations in the most advantageous manner.|
|●||We must manufacture, promote, market, import, offer, sell, distribute and supply the Licensed Products in accordance with certain distribution requirements set forth in the License Agreement. For instance, we may not package the Licensed Products with other products and we may deliver them only as supplied by an Authorized Supplier. Accordingly, the limitations imposed by the License Agreement may impact our ability to pursue certain marketing strategies and distribution channels, which may have a material adverse effect on us and our business, assets and prospects.|
|●||The Licensor may require any change to any Licensed Product by any Authorized Supplier and may make any change to any sales or promotional literature made available by the Licensor, provided that such changes do not affect any regulatory approvals we obtain. This right of the Licensor may create material expense for us, may be practically difficult to accomplish and may cause relationship, reputational and other adverse harm to us, our business and our prospects, without our having any control over these changes. Further, the Licensor is not liable for any of the costs to us of such changes.|
|●||We must file for, prosecute the application for, and obtain all regulatory approvals for each of the Licensed Products and all legal permits necessary for promoting, marketing, offering or selling each Licensed Product. The regulatory approval process can be expensive and time consuming, and there can be no assurances that we will be able to obtain or maintain any or all required permits.|
Except with respect to the Licensor’s ownership of all intellectual property rights in respect of the licensed property and the non-infringement by our exercise of those rights, the Licensor provides no, and disclaims all, representations, warranties or covenants relating to the licensed intellectual property or any other matters under the License Agreement and in particular disclaims any fitness of the property for any purpose. These provisions limit our recourse in the event that the licensed intellectual property is flawed, defective, inadequate, incomplete, uncommercial, wrongly described or otherwise not useful for our purposes. We have not independently verified any of the technical, scientific, commercial, legal, medical or other circumstances or nature of the licensed intellectual property and therefore there can be no assurances that any of the foregoing risks have been reduced or eliminated. These provisions represent a significant risk of a material adverse impact on us, our business and our prospects.
In addition, see the risks in “—Risks Related to Our Intellectual Property” below. These risks are not the only risks inherent in the License Agreement. You are encouraged to read the complete text of the License Agreement, which is filed as an exhibit to the registration statement of which this prospectus is a part.
Neither we nor the Licensor have yet launched the SGT and the ability to do so will depend on the acceptance of the SGT in the APAC healthcare market.
Neither we nor the Licensor has yet launched the SGT and it has not yet received regulatory approvals in any country or territory. We are faced with the risk that the APAC Region marketplace will not be receptive to the SGT over competing products and that we will be unable to enter the marketplace or compete effectively. Factors that could affect our ability to establish the SGT or any future diagnostic test based on the Biosensor Platform include:
sales of the SGT across the APAC Region may be limited due to the complex nature of the healthcare system in each country and territory in the region, low average personal income, lack of patient cost reimbursement and pricing controls
|●||the development of products or devices which could result in a shift of customer preferences away from our device and services and significantly decrease revenue;|
|●||the increased use of improved diabetes drugs that could encourage certain diabetics to test less often, resulting in less usage of self-monitoring (saliva-based, blood-based or otherwise) test device for certain types of diabetics;|
|●||the challenges of developing (or acquiring externally-developed) technology solutions that are adequate and competitive in meeting the requirements of next-generation design challenges;|
|●||the significant number of current competitors in the glucose monitoring market who have significantly greater brand recognition and more recognizable trademarks and who have established relationships with diabetes healthcare providers and payors; and|
|●||intense competition to attract acquisition targets, which may make it more difficult for us to acquire companies or technologies at an acceptable price or at all.|
We cannot assure you that the SGT or any future diagnostic test based on the Biosensor Platform will gain market acceptance. If the market for the SGT or any future test fails to develop or develops more slowly than expected, or if any of the technology and standards supported by us do not achieve or sustain market acceptance, our business and operating results would be materially and adversely affected.
We cannot accurately predict the volume or timing of any sales, making the timing of any revenues difficult to predict.
We may be faced with lengthy and unpredictable customer evaluation and approval processes associated with the SGT. Consequently, we may incur substantial expenses and devote significant management effort and expense in developing customer adoption of the SGT, which may not result in revenue generation. We must also obtain regulatory approvals of the SGT in each respective jurisdiction, which is subject to risk and potential delays, and may actually occur. The same risks apply to other tests we may develop based on the Biosensor Platform. As such, we cannot accurately predict the volume, if any, or timing of any future sales.
If the SGT fails to satisfy current or future customer requirements, we may be required to make significant expenditures to redesign the product, and we may have insufficient resources to do so.
The SGT is being designed to address an existing marketplace and must comply with current and evolving customer requirements in order to gain market acceptance. There is a risk that the SGT will not meet anticipated customer requirements or desires. If we are required to redesign our products to address customer demands or otherwise modify our business model, we may incur significant unanticipated expenses and losses, and we may be left with insufficient resources to engage in such activities. If we are unable to redesign our products, develop new products or modify our business model to meet customer desires or any other customer requirements that may emerge, our operating results would be materially adversely affected, and our business might fail.
We expect to derive substantially all of our revenues from the SGT and the underlying Biosensor Platform technology.
We expect to derive substantially all of our revenues from sales of products derived from the Biosensor Platform technology, which we license from the Licensor. Our initial product utilizing this technology is the SGT. As such, any factor adversely affecting sales of the SGT, including the product development and release cycles, regulatory issues, market acceptance, product competition, performance and reliability, reputation, price competition and economic and market conditions, would likely harm our operating results. We may be unable to fully develop the SGT or other products utilizing our technology, which may lead to the failure of our business. Moreover, in spite of our efforts related to the registration of our technology, if intellectual property protection is not available for the Biosensor Platform technology, the viability of the SGT and any other products that may be derived from such technology would likely be adversely impacted to a significant degree, which would materially impair our prospects.
We have yet to finalize the manufacturing plan for the production of the SGT and its components on a mass market commercial scale, and may be dependent upon third-party manufacturers and suppliers, making us vulnerable to contractual relationships and market forces, supply shortages and problems and price fluctuations, which could harm our business.
While we are using the facilities of Australian National Fabrication Facility to manufacture the SGB for clinical evaluation, we have yet to finalize the manufacturing plan for the production of the SGT and its components on a mass market commercial scale. We presently do not possess the manufacturing and processing capacity to meet the production requirements of clinical testing or consumer demand in a timely manner. Accordingly, we may rely on outsourcing the manufacturing of the SGT or its components.
Our capacity to conduct clinical evaluation and launch our products in the market will depend in part on our ability or the ability of third-party manufacturers to provide our products on a large scale, at a competitive cost and in accordance with regulatory requirements. We cannot guarantee that we or our third-party manufacturers or suppliers will be able to provide the SGT and its components in mass-market quantities in a timely or cost-effective manner, or at all. Delays in providing or increasing production or processing capacity could result in additional expense or delays in our clinical evaluation, regulatory submissions and the market launch of our products. In addition, we or our third-party manufacturers or suppliers could make errors that could adversely affect the efficacy or safety of the SGT or cause delays in shipment.
Any third-party party manufacturers or suppliers may encounter problems for a variety of reasons, including, for example, failure to follow specific protocols and procedures, failure to comply with applicable legal and regulatory requirements, equipment malfunction and environmental factors, failure to properly conduct their own business affairs, and infringement of third-party intellectual property rights, any of which could delay or impede their ability to meet our requirements. Reliance on these third-party manufacturers or suppliers also subjects us to other risks where:
|●||we may have difficulty locating and qualifying alternative manufacturers or suppliers;|
switching manufacturers or suppliers may require product redesign and possibly submission to regulatory bodies, which could significantly impede or delay our commercial activities;
|●||sole-source manufacturers or suppliers could fail to supply the SGT or components of the SGT; and|
|●||manufacturers or suppliers could encounter financial or other business hardships unrelated to us, interfering with their fulfillment of our orders and requirements.|
We may not be able to quickly establish additional or alternative manufacturers or suppliers if necessary, in part because we may need to undertake additional activities to establish such manufacturers or suppliers as required by the regulatory approval process. We potentially will rely on certain single-source manufacturers or suppliers, and to the extent we do so, these risks will be intensified. Any interruption or delay in obtaining products or components from our third-party manufacturers or suppliers, or shortages of products or components, could impair our ability to meet the demand of our customers and cause them to switch to competing products.
We expect to rely in part on third-party distributors to effectively distribute our products.
We will depend in part on qualified distributors for the marketing and selling of our products. We will depend on these distributors’ efforts to market our products, yet we will be unable to control their efforts completely. We have not yet executed any distribution agreements in this regard and there can be no assurances that suitable distributors will be engaged on terms acceptable to us. These distributors typically would sell a variety of other, non-competing products that may limit the resources they dedicate to selling the SGT. In addition, we are unable to ensure that our distributors will comply with all applicable laws regarding the sale of our products. If our distributors fail to effectively market and sell the SGT in full compliance with applicable laws, our operating results and business may suffer. Recruiting and retaining qualified third-party distributors and training them in our technology and product offering will require significant time and resources. To develop and expand our distribution, we will be required to scale and improve our processes and procedures that support our distributors. Further, if our relationship with a successful distributor terminates, we may be unable to replace that distributor without disruption to our business. If we fail to develop or maintain positive relationships with our distributors, including in new markets, fail to manage, train or incentivize these distributors effectively, or fail to provide distributors with competitive products on attractive terms, or if these distributors are not successful in their sales efforts, we may not achieve or may have a reduction in revenue and our operating results, reputation and business would be harmed.
Failure in our conventional, online and digital marketing efforts could impact our ability to generate sales.
We intend to engage in conventional marketing strategies and also may utilize online and digital marketing in order to create awareness to the SGT. Our management believes that using a wide variety of marketing strategies, including online advertisement and a variety of other pay-for-performance methods may be effective for marketing and generating sales of the SGT, as opposed to relying exclusively on traditional, expensive retail channels. In any event, there is a risk that any or all of our marketing strategies could fail. We cannot predict whether the use of traditional and/or non-traditional retail sales tools, in combination with reliance on healthcare providers to educate our customers about the SGT, will be successful in effectively marketing the SGT. The failure of our marketing efforts could negatively impact our ability to generate sales.
The SGT may utilize a smart device platform and, in the future, other software platforms. If we are unable to achieve or maintain a good relationship with the providers of these platforms, or if a platform’s application store (such as the App Store for iOS devices or the Google Play Store for Android devices), or any other applicable platform resource were unavailable for any prolonged period of time, our business will suffer.
A key component of the SGT is a smart device application that includes tools to help diabetic patients manage their disease. This application will be compatible with various operating platforms. We will be subject to each of the standard terms and conditions for application developers, which govern the promotion, distribution and operation of applications through their respective app stores. If we are unable to make the SGT application compatible with these platforms, or if we fail to comply with the standard terms and conditions for developers or there is any deterioration in our relationship with either platform providers or others after our application is available, our business would be materially harmed.
As we intend to conduct business internationally, we are susceptible to risks associated with international relationships.
We are based in the United States, and expect to market, promote and sell our products in the APAC Region, initially in China. The international nature of our business requires significant management attention, which could negatively affect our business if it diverts their attention from their other responsibilities. In addition, doing business with foreign customers subjects us to additional risks that companies do not generally face if they operate exclusively within a single jurisdiction. These risks and uncertainties include:
|●||different regulatory requirements for medical product approvals in foreign countries;|
|●||different standards of care in various countries that could complicate the evaluation of our product candidates;|
|●||different medical product import and export rules;|
|●||different labor laws;|
|●||reduced protection for intellectual property rights in certain countries;|
|●||unexpected changes in tariffs, trade barriers and regulatory requirements;|
|●||different reimbursement systems and different competitive medical products indicated for glucose testing;|
|●||localization of products and services, including translation of foreign languages;|
|●||delivery, logistics and storage costs;|
|●||longer accounts receivable payment cycles and difficulties in collecting accounts receivable;|
|●||difficulties providing customer services;|
|●||economic weakness, including inflation, or political instability in particular foreign economies and markets;|
|●||compliance with tax, employment, immigration and labor laws for employees living or traveling abroad;|
|●||compliance with the Foreign Corrupt Practices Act, or the “FCPA,” and other anti-corruption and anti-bribery laws;|
|●||foreign taxes, including withholding of payroll taxes;|
|●||foreign currency fluctuations, which could result in increased operating expenses and reduced revenues, and other obligations incident to doing business in another country;|
|●||restrictions on the repatriation of earnings;|
|●||workforce uncertainty in countries where labor unrest is more common than in the United States;|
|●||potential liability resulting from development work conducted by third party foreign distributors; and|
|●||business interruptions resulting from geopolitical actions, including war and terrorism, or natural disasters, management, communication and integration problems resulting from cultural differences and geographic dispersion.|
The occurrence of any or all of these risks could adversely affect our business. In the event that we are unable to manage the complications associated with international operations, our results of operations, financial condition and business prospects could be materially and adversely affected.
If third-party payors do not provide coverage and reimbursement for the use of the SGT, our business and prospects may be negatively impacted.
Third-party payors, whether governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs. In addition, in certain countries, no uniform policy of coverage and reimbursement for medical device products and services exists among third-party payors. Therefore, coverage and reimbursement for medical device products and services can differ significantly from payor to payor. In addition, payors continually review new technologies for possible coverage and can, without notice, deny coverage for these new products and procedures. As a result, the coverage determination process is often a time-consuming and costly process that will require us to provide scientific and clinical support for the use of our products to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained, or maintained if obtained.
Reimbursement systems in international markets vary significantly by country and by region within some countries, and reimbursement approvals must be obtained on a country-by-country basis. In many international markets, a product must be approved for reimbursement before it can be approved for sale in that country.
Further, many international markets have government-managed healthcare systems that control reimbursement for new devices and procedures. For example, no government in the areas where we hold our license has approved reimbursement of the SGT in particular. In most markets, there are private insurance systems as well as government-managed systems. If sufficient coverage and reimbursement is not available for our current or future products, in any country where our license operates, the demand for our products and our revenues will be adversely affected.
Non-United States governments often impose strict price controls, which may adversely affect our future profitability.
We intend to seek approval to market the SGT across the APAC Region. If we obtain approval in one or more of the jurisdictions within our License Agreement, we will be subject to rules and regulations in those jurisdictions relating to our products. In some countries, pricing may be subject to governmental control under certain circumstances, which may vary country by country. In these countries, pricing negotiations with governmental authorities can take considerable time after the receipt of requisite marketing approval. To obtain reimbursement or pricing approval in some countries, we may be required to conduct a clinical evaluation that compares the cost-effectiveness of our product to other available products. If reimbursement of our product candidates is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, we may be unable to achieve or sustain profitability. Price controls may reduce prices to levels significantly below those that would prevail in less regulated markets or limit the volume of products which may be sold, either of which may have a material and adverse effect on potential revenues from sales of the SGT. Moreover, the process and timing for the implementation of price restrictions is unpredictable, which may cause potential revenues from the sales of the SGT to fluctuate from period to period.
The SGT, including its software and systems, may contain undetected errors, which could limit our ability to provide our products and services and diminish the attractiveness of our service offerings.
The SGT may contain undetected errors, defects or bugs. As a result, our customers or end users may discover errors or defects in our products, software or systems, or our products, software or systems may not operate as expected. We may discover significant errors or defects in the future that we may not be able to fix. Our inability to fix any of those errors could limit our ability to provide our products and services, impair the reputation of our brand and diminish the attractiveness of our product and service offerings to our customers.
In addition, we may utilize third party technology or components in our products, and we rely on those third parties to provide support services to us. The existence of errors, defects or bugs in third party technology or components, or the failure of those third parties to provide necessary support services to us, could materially adversely impact our business.
We will rely on the proper function, security and availability of our information technology systems and data to operate our business, and a breach, cyber-attack or other disruption to these systems or data could materially and adversely affect our business, results of operations, financial condition, cash flows, reputation or competitive position.
We will depend on sophisticated software and other information technology systems to operate our business, including to process, transmit and store sensitive data, and our products and services will include information technology systems that collect data regarding patients. We could experience attempted or actual interference with the integrity of, and interruptions in, our technology systems, as well as data breaches, such as cyber-attacks, malicious intrusions, breakdowns, interference with the integrity of our products and data or other significant disruptions. Furthermore, we may rely on third-party vendors to supply and/or support certain aspects of our information technology systems. These third-party systems could also become vulnerable to cyber-attack, malicious intrusions, breakdowns, interference or other significant disruptions, and may contain defects in design or manufacture or other problems that could result in system disruption or compromise the information security of our own systems.
Our international operations mean that we are subject to laws and regulations, including data protection and cybersecurity laws and regulations, in many jurisdictions. Furthermore, there has been a developing trend of civil lawsuits and class actions relating to breaches of consumer data held by large companies or incidents arising from other cyber-attacks. Any data security breaches, cyber-attacks, malicious intrusions or significant disruptions could result in actions by regulatory bodies and/or civil litigation, any of which could materially and adversely affect our business, results of operations, financial condition, cash flows, reputation or competitive position.
In addition, our information technology systems require an ongoing commitment of significant resources to maintain, protect, and enhance existing systems and develop new systems to keep pace with continuing changes in information processing technology, evolving legal and regulatory standards, the increasing need to protect patient and customer information, changes in the techniques used to obtain unauthorized access to data and information systems, and the information technology needs associated any new products and services. There can be no assurance that our process of consolidating, protecting, upgrading and expanding our systems and capabilities, continuing to build security into the design of our products, and developing new systems to keep pace with continuing changes in information processing technology will be successful or that additional systems issues will not arise in the future.
If our information technology systems, products or services or sensitive data are compromised, patients or employees could be exposed to financial or medical identity theft or suffer a loss of product functionality, and we could lose existing customers, have difficulty attracting new customers, have difficulty preventing, detecting, and controlling fraud, be exposed to the loss or misuse of confidential information, have disputes with customers, physicians, and other health care professionals, suffer regulatory sanctions or penalties, experience increases in operating expenses or an impairment in our ability to conduct our operations, incur expenses or lose revenues as a result of a data privacy breach, product failure, information technology outages or disruptions, or suffer other adverse consequences including lawsuits or other legal action and damage to our reputation.
Our future performance will depend on the continued engagement of key members of our management team.
Our future performance depends to a large extent on the continued services of members of our current management including, in particular, our President and our Chief Operating Officer. In the event that we lose the continued services of such key personnel for any reason, this could have a material adverse effect on our business, operations and prospects.
Certain of our officers and directors will allocate their time to other businesses. This could have a negative impact on our business.
Our President, Harry Simeonidis, will not commit his full time to our affairs. He also serves as General Manager of FarmaForce Limited. While we presently expect Mr. Simeonidis to devote 50% of his business time to our operations, and we expect that such amount of time will be sufficient for him to satisfy his responsibilities to us on a timely basis, if he is unable to balance his duties to both organizations, it could have a negative impact on our business. However, there can be no assurance that he will be able to devote sufficient time to our operations.
If we are not able to attract and retain highly skilled managerial, scientific and technical personnel, we may not be able to implement our business model successfully.
We believe that our management team must be able to act decisively to apply and adapt our business model in the markets in which we will compete. In addition, we will rely upon technical and scientific employees or third-party contractors to effectively establish, manage and grow our business. Consequently, we believe that our future viability will depend largely on our ability to attract and retain highly skilled managerial, sales, scientific and technical personnel. In order to do so, we may need to pay higher compensation or fees to our employees or consultants than we currently expect, and such higher compensation payments would have a negative effect on our operating results. Competition for experienced, high-quality personnel is intense and we cannot assure that we will be able to recruit and retain such personnel. We may not be able to hire or retain the necessary personnel to implement our business strategy. Our failure to hire and retain such personnel could impair our ability to develop new products and manage our business effectively.
If we or our manufacturers fail to comply with the regulatory quality system regulations or any applicable equivalent regulations, our proposed operations could be interrupted, and our operating results would suffer.
We and any third-party manufacturers and suppliers of ours will be required, to the extent of applicable regulation, to follow the quality system regulations of each jurisdiction we will seek to penetrate and also will be subject to the regulations of these jurisdictions regarding the manufacturing processes. If we or any third-party manufacturers or suppliers of ours are found to be in significant non-compliance or fail to take satisfactory corrective action in response to adverse regulatory findings in this regard, regulatory agencies could take enforcement actions against us and such manufacturers or suppliers, which could impair or prevent our ability to produce our products in a cost-effective and timely manner in order to meet customers’ demands. Accordingly, our operating results would suffer.
We may be subject to healthcare fraud and abuse laws and regulations.
Many international healthcare laws and regulations apply to the glucose monitoring business and medical devices. We will be subject to certain regulations regarding commercial practices false claims. If our operations or arrangements are found to be in violation of governmental regulations, we may be subject to civil and criminal penalties, damages, fines and the curtailment of our operations. All of these penalties could adversely affect our ability to operate our business and our financial results.
Product liability suits, whether or not meritorious, could be brought against us due to an alleged defective product or for the misuse of the SGT. These suits could result in expensive and time-consuming litigation, payment of substantial damages, and an increase in our insurance rates.
If the SGT or any future diagnostic test based on the Biosensor Platform is defectively designed or manufactured, contains defective components or is misused, or if someone claims any of the foregoing, whether or not meritorious, we may become subject to substantial and costly litigation. Misusing our devices or failing to adhere to the operating guidelines or our devices producing inaccurate meter readings could cause significant harm to patients, including death. In addition, if our operating guidelines are found to be inadequate, we may be subject to liability. Product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizable damage awards against us. While we expect to maintain product liability insurance, we may not have sufficient insurance coverage for all future claims. Any product liability claims brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing continuing coverage, could harm our reputation in the industry and could reduce revenue. Product liability claims in excess of our insurance coverage would be paid out of cash reserves harming our financial condition and adversely affecting our results of operations.
If we are found to have violated laws protecting the confidentiality of patient health information, we could be subject to civil or criminal penalties, which could increase our liabilities and harm our reputation or our business.
Part of our business plan includes the storage and potential monetization of data of users of the SGT. There are a number of laws around the world protecting the confidentiality of certain patient health information, including patient records, and restricting the use and disclosure of that protected information. Privacy rules protect medical records and other personal health information by limiting their use and disclosure, giving individuals the right to access, amend and seek accounting of their own health information and limiting most use and disclosures of health information to the minimum amount reasonably necessary to accomplish the intended purpose. We may face difficulties in holding such information in compliance with applicable law. If we are found to be in violation of the privacy rules, we could be subject to civil or criminal penalties, which could increase our liabilities, harm our reputation and have a material adverse effect on our business, financial condition and results of operations.
We are party to agreements pursuant to which we may be required to make payments to certain of our affiliates, which may reduce our cash flow and profits.
We are party to agreements (including the License Agreement) pursuant to which we may be required to make payments to certain of our affiliates as described in “Certain Transactions.” For instance, commencing after the receipt of regulatory approval in any jurisdiction in the APAC Region, we may be required to pay the Minimum Royalty with respect to such jurisdiction to our controlling stockholder, the Licensor, although the determination of the Minimum Royalty is subject to agreement between us and the Licensor as to certain parameters, as described elsewhere in this prospectus, with disputes generally resolved by an independent third party. In addition, Clinical Research Corporation, or “CRC,” an entity under common control with us, may provide medical affairs services to us. While these contracts have been approved by the independent members of our board of directors, and while we believe that the agreements reflect arms’-length negotiations, we cannot assure you that such services are not available at lower cost from third parties. As with any payments made to suppliers, payments made to the Licensor or CRC will reduce our cash flow and profits.
Risks Related to Product Development and Regulatory Approval
The regulatory approval process which we may be required to navigate may be expensive, time-consuming, and uncertain and may prevent us from obtaining clearance for the product launch of the SGT or our any future product.
We intend to market the SGT following regulatory approval. To date, we have not received regulatory approval in any jurisdiction.
The research, design, testing, manufacturing, labeling, selling, marketing and distribution of medical devices are subject to extensive regulation by country-specific regulatory authorities, which regulations differ from country to country. There can be no assurance that, even after such time and expenditures, we will be able to obtain necessary regulatory approvals for clinical testing or for the manufacturing or marketing of any products. In addition, during the regulatory process, other companies may develop other technologies with the same intended use as our products.
We also will be subject to numerous post-marketing regulatory requirements, which may include labeling regulations and medical device reporting regulations, which may require us to report to different regulatory agencies if our device causes or contributes to a death or serious injury, or malfunctions in a way that would likely cause or contribute to a death or serious injury. In addition, these regulatory requirements may change in the future in a way that adversely affects us. If we fail to comply with present or future regulatory requirements that are applicable to us, we may be subject to enforcement action by regulatory agencies, which may include, among others, any of the following sanctions:
|●||untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties;|
|●||customer notification, or orders for repair, replacement or refunds;|
|●||voluntary or mandatory recall or seizure of our current or future products;|
|●||imposing operating restrictions, suspension or shutdown of production;|
|●||refusing our requests for clearance or pre-market approval of new products, new intended uses or modifications to the SGT or future products;|
|●||rescinding clearance or suspending or withdrawing pre-market approvals that have already been granted; and|
The occurrence of any of these events may have a material adverse effect on our business, financial condition and results of operations.
Clinical data obtained subsequent to the implementation of the clinical evidence module may not meet the required objectives, which could delay, limit or prevent additional regulatory approval.
There can be no assurance that we will successfully complete any clinical evaluations necessary to receive regulatory approvals. While preliminary results have been encouraging and indicative of the potential performance of the SGT, data already obtained, or in the future obtained, from clinical studies do not necessarily predict the results that will be obtained from later clinical evaluations. The failure to adequately demonstrate the analytical performance characteristics of the device under development could delay or prevent regulatory approval of the device, which could prevent or result in delays to market launch and could materially harm our business. There can be no assurance that we will be able to receive approval for any potential applications of our principal technology, or that we will receive regulatory clearances from targeted regions or countries.
We may be unable to complete required clinical evaluations, or we may experience significant delays in completing such clinical evaluations, which could prevent or significantly delay our targeted product launch timeframe and impair our viability and business plan.
The completion of any future clinical evaluations for the SGT, or other studies that we may be required to undertake in the future for the SGT or other products based on the Biosensor Platform, could be delayed, suspended or terminated for several reasons, including:
|●||we may fail to or be unable to conduct the clinical evaluation in accordance with regulatory requirements;|
|●||sites participating in the trial may drop out of the trial, which may require us to engage new sites for an expansion of the number of sites that are permitted to be involved in the trial;|
|●||patients may not enroll in, remain in or complete, the clinical evaluation at the rates we expect; and|
|●||clinical investigators may not perform our clinical evaluation on our anticipated schedule or consistent with the clinical evaluation protocol and good clinical practices.|
If our clinical evaluations are delayed it will take us longer to ultimately launch the SGT and our other products based on the Biosensor Platform in the market and generate revenues. Moreover, our development costs will increase if we have material delays in our clinical evaluation or if we need to perform more or larger clinical evaluations than planned.
We are subject to the risk of reliance on third parties to conduct our clinical evaluation work.
We will depend on independent clinical investigators to conduct our clinical evaluations. Contract research organizations may also assist us in the collection and analysis of data. These investigators and contract research organizations will not be our employees and we will not be able to control, other than by contract, the amount of resources, including time that they devote to products that we develop. If independent investigators fail to devote sufficient resources to our clinical evaluations, or if their performance is substandard, it will delay the approval or clearance and ultimately the market launch of any products that we develop. Further, regulatory bodies in the APAC Region require that we comply with standards, commonly referred to as good clinical practice, for conducting, recording and reporting clinical evaluations to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of trial subjects are protected. If our independent clinical investigators and contract research organizations fail to comply with good clinical practice, the results of our clinical evaluations could be called into question and the clinical development of our product candidates could be delayed. Failure of clinical investigators or contract research organizations to meet their obligations to us or comply with applicable regulations could adversely affect the clinical development of our product candidates and harm our business. Moreover, we intend to have several clinical evaluations in order to support our marketing efforts and business development purposes. Such clinical evaluations will be conducted by third parties as well. Failure of such clinical evaluations to meet their primary endpoints could adversely affect our marketing efforts.
Risks Related to Our Intellectual Property
We depend on intellectual property licensed from the Licensor, and any absence of legal effect of the license or dispute over the license would significantly harm our business.
We are dependent on the intellectual property licensed from the Licensor. Although the License Agreement may not be terminated by the Licensor as long as we are continuing our operations, any absence of legal effect of the license could result in the loss of significant rights and could harm our ability to launch the SGT in the market. Disputes may also arise between us and the Licensor regarding intellectual property subject to the License Agreement. If disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, or are insufficient to provide us the necessary rights to use the intellectual property, we may be unable to successfully develop and launch the SGT and our other product candidates. If we or the Licensor fail to adequately protect this intellectual property, our ability to launch our products in the market also could suffer. For so long as we are dependent on the intellectual property covered by the License Agreement for the pursuit of our business, any such disputes relating to the License Agreement or failure to protect the intellectual property could threaten our viability.
We will depend primarily on the Licensor to file, prosecute, maintain, defend and enforce intellectual property that we license from it and that is material to our business.
The intellectual property relating to the SGT is owned by the Licensor. Under the License Agreement, the Licensor generally has the right to file, prosecute, maintain and defend the intellectual property we have licensed from the Licensor. If the Licensor fails to conduct these activities for intellectual property protection covering any of our product candidates, our ability to develop and launch those product candidates may be adversely affected and we may not be able to prevent competitors from making, using or selling competing products. In addition, pursuant to the terms of the License Agreement with the Licensor, the Licensor generally has the right to control the enforcement of our licensed intellectual property and the defense of any claims asserting the invalidity of that intellectual property. We cannot be certain that the Licensor will allocate sufficient resources to and otherwise prioritize the enforcement of such intellectual property or the defense of such claims to protect our interests in the licensed intellectual property. In the absence of action by the Licensor, we may be unable to protect and enforce the proprietary rights on which our business relies. Even if we are not a party to these legal actions, an adverse outcome could harm our business because it might prevent us from continuing to use the licensed intellectual property that we need to operate our business. In addition, even if we take control of the prosecution of licensed intellectual property and related applications, enforcement of licensed intellectual property, or defense of claims asserting the invalidity of that intellectual property in the APAC Region, we may still be adversely affected or prejudiced by actions or inactions of the Licensor and its counsel that took place prior to or after our assuming control, and we cannot ensure the cooperation of the Licensor in any such action. Furthermore, if we take action to protect, enforce or defend the licensed intellectual property, we may incur significant costs and the attention of our management may be diverted from our normal business operations. As a result, our business, results of operations and financial condition could be materially and adversely affected.
We and the Licensor may be unable to protect or enforce the intellectual property rights licensed to us, which could impair our competitive position.
In order for our business to be viable and to compete effectively, the proprietary rights with respect to the technologies and intellectual property used in our products must be developed and maintained. The Licensor relies primarily on patent protection and trade secrets, as well as a combination of copyright and trademark laws and nondisclosure and confidentiality agreements to protect its technology and intellectual property rights. There are significant risks associated with the Licensor’s ability (or our ability, in the absence of action by the Licensor) to protect the intellectual property licensed to us, including:
|●||pending intellectual property applications may not be approved or may take longer than expected to result in approval in one or more of the countries in which we operate;|
|●||the Licensor’s intellectual property rights may not provide meaningful protection;|
|●||other companies may challenge the validity or extent of the Licensor’s patents and other proprietary intellectual property rights through litigation, oppositions and other proceedings. These proceedings can be protracted as well as unpredictable;|
|●||other companies may have independently developed (or may in the future independently develop) similar or alternative technologies, may duplicate the Licensor’s technologies or may design their technologies around the Licensor’s technologies;|
|●||enforcement of intellectual property rights is complex, uncertain and expensive, and may be subject to lengthy delays. In the event we take control of any such action under the License Agreement, our ability to enforce our intellectual property protection could be limited by our financial resources; and|
|●||the other risks described in “—Risks Related to Our Intellectual Property.”|
If any of the Licensor’s patents or other intellectual property rights fail to protect the technology licensed by us, it would make it easier for our competitors to offer similar products. Any inability on the Licensor’s part (or on our part, in the absence of action by the Licensor) to adequately protect its intellectual property may have a material adverse effect on our business, financial condition and results of operations.
We and/or the Licensor may be subject to claims alleging the violation of the intellectual property rights of others.
We may face significant expense and liability as a result of litigation or other proceedings relating to intellectual property rights of others. In the event that another party has intellectual property protection relating to an invention or technology licensed by us from the Licensor, we and/or the Licensor may be required to participate in an interference proceeding declared by the regulatory authorities to determine priority of invention, which could result in substantial uncertainties and costs for us, even if the eventual outcome was favorable to us. We and/or the Licensor also could be required to participate in interference proceedings involving intellectual property of another entity. An adverse outcome in an interference proceeding could require us and/or the Licensor to cease using the technology, to substantially modify it or to license rights from prevailing third parties, which could delay or prevent the launch of our products in the market or adversely affect our profitability.
The cost to us of any intellectual property litigation or other proceeding relating the intellectual property licensed by us from the Licensor, even if resolved in our favor, could be substantial, especially given our early stage of development. A third party may claim that we and/or the Licensor are using inventions claimed by their intellectual property and may go to court to stop us and/or the Licensor from engaging in our normal operations and activities, such as research, development and the sale of any future products. Such lawsuits are expensive and would consume significant time and other resources. There is a risk that a court will decide that we and/or the Licensor are infringing the third party’s intellectual property and will order us to stop the activities claimed by the intellectual property. In addition, there is a risk that a court will order us and/or the Licensor to pay the other party damages for having infringed their intellectual property. While the Licensor is required to indemnify us for certain losses in connection with such proceedings, there can be no assurance that the Licensor will be able to satisfy any such obligation. Moreover, there is no guarantee that any prevailing intellectual property owner would offer us a license so that we could continue to engage in activities claimed by the intellectual property, or that such a license, if made available to us, could be acquired on commercially acceptable terms.
The Licensor has limited foreign intellectual property rights and may not be able to protect its intellectual property rights throughout the APAC Region.
Our intellectual property rights consist primarily of intellectual property licensed from the Licensor. The Licensor has determined that filing, prosecuting and defending intellectual property on devices in all countries throughout the APAC Region would be prohibitively expensive, and intellectual property rights in some countries can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property to the same extent as laws in the United States. Consequently, we and/or the Licensor may not be able to prevent third parties from practicing our inventions or from selling or importing products made using our inventions. Competitors may use our technologies in jurisdictions where we have not obtained intellectual property rights to develop their own products and further, may export otherwise infringing products to territories where we have intellectual property protection, but enforcement is not as strong as that in the United States.
Policing unauthorized use of proprietary technology is difficult and expensive. The legal systems of certain countries do not favor the enforcement of trade secrets and other intellectual property, particularly those relating to medical device products, which could make it difficult for us to stop the infringement of our intellectual property or marketing of competing products in violation of our proprietary rights generally. An adverse determination or an insufficient damage award in any such litigation could materially impair our intellectual property rights and may otherwise harm our business. In addition, China and certain other developing countries in the APAC Region have compulsory licensing laws under which an intellectual property owner may be compelled to grant licenses to third parties. In those countries, we and/or the Licensor may have limited remedies if our intellectual property is infringed or if we and/or the Licensor are compelled to grant a license to a third party, which could materially diminish the value of that intellectual property.
Furthermore, we may not be able to register or otherwise protect the trademark “Glucose Biosensor” in China and certain other developing countries in the APAC Region.
We and the Licensor rely on confidentiality agreements that could be breached and may be difficult to enforce, which could result in third parties using our intellectual property to compete against us.
Although we believe that we and the Licensor take reasonable steps to protect our intellectual property, including the use of agreements relating to the non-disclosure of confidential information to third parties, as well as agreements that purport to require the disclosure and assignment to us of the rights to the ideas, developments, discoveries and inventions of our employees and consultants while we or the Licensor employ them, the agreements can be difficult and costly to enforce. Although we and the Licensor seek to enter into these types of agreements with contractors, consultants, advisors and research collaborators, to the extent that employees and consultants utilize or independently develop intellectual property in connection with any of our projects, disputes may arise as to the intellectual property rights associated with our technology. If a dispute arises, a court may determine that the right belongs to a third party. In addition, enforcement of our rights and the rights of the Licensor can be costly and unpredictable. We and the Licensor also rely on trade secrets and proprietary know-how that we and the Licensor may seek to protect in part by confidentiality agreements with employees, contractors, consultants, advisors or others. Despite the protective measures we employ, we and the Licensor still face the risk that:
|●||these agreements may be breached;|
|●||these agreements may not provide adequate remedies for the applicable type of breach;|
|●||our proprietary know-how will otherwise become known; or|
|●||our competitors will independently develop similar technology or proprietary information.|
We and the Licensor may be subject to claims challenging the invention of the intellectual property that we license from the Licensor.
We and the Licensor may be subject to claims that former employees, collaborators or other third parties have an interest in intellectual property as an inventor or co-inventor. For example, we and the Licensor may have inventorship disputes arising from conflicting obligations of consultants or others who are involved in developing our product candidates. Litigation may be necessary to defend against these and other claims challenging inventorship. If we and the Licensor fail in defending any such claims, in addition to paying monetary damages, we and the Licensor may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees. As a result, it is unclear whether and, if so, to what extent employees of ours and the Licensor may be able to claim compensation with respect to our future revenue. We may receive less revenue from future products if any of employees of the Licensor or us successfully claim compensation for their work in developing our intellectual property, which in turn could impact our future profitability.
Risks Related to Our Industry
We face intense competition in the self-monitoring of glucose market, particularly blood-based products, and as a result we may be unable to effectively compete in our industry.
With our first product, the SGT, we expect to compete directly and primarily with large medical device companies, as well as with second and third tier companies having various levels of sophistication and resources. The large companies have most of the glucose monitoring business and strong research and development capacity. Their dominant market position over the last few decades and significant control over markets could significantly limit our ability to introduce the SGT or effectively market and generate sales of the product.
We have not yet entered the commercial stage and most of our competitors have long histories and strong reputations within the industry. They have significantly greater brand recognition, financial and human resources than we do. They also have more experience and capabilities in researching and developing testing devices, obtaining and maintaining regulatory clearances and other requirements, manufacturing and marketing those products than we do. There is a significant risk that we may be unable to overcome the advantages held by our competition, and our inability to do so could lead to the failure of our business.
Competition in the glucose monitoring markets is intense, which can lead to, among other things, price reductions, longer selling cycles, lower product margins, loss of market share and additional working capital requirements. To succeed, we must, among other critical matters, gain consumer acceptance for the SGT, technical solutions, prices and response time, or a combination of these factors, than those of other competitors. If our competitors offer significant discounts on certain products, we may need to lower our prices or offer other favorable terms in order to compete successfully. Moreover, any broad-based changes to our prices and pricing policies could make it difficult to generate revenues or cause our revenues, if established, to decline. Moreover, if our competitors develop and commercialize products that are more desirable than the SGT or the other products that we may develop, we may not convince customers to use our products. Any such changes would likely reduce our commercial opportunity and revenue potential and could materially adversely impact our operating results.
If we or the Licensor fail to respond quickly to technological developments, our products may become uncompetitive and obsolete.
The glucose monitoring market may experience rapid technology developments, changes in industry standards, changes in customer requirements and frequent new product introductions and improvements. If we or the Licensor are unable to respond to these developments, we may lose competitive position, and the SGT or any other device or technology may become uncompetitive or obsolete, causing our business and prospects to suffer. In order to compete, we and the Licensor may have to develop, license or acquire new technology on a schedule that keeps pace with technological developments and the requirements for products addressing a broad spectrum and designers and designer expertise in our industries.
Risks Related to Our Proposed Operations in the APAC Region
The medical device and other medical product industries in the APAC Region generally are highly regulated and such regulations are subject to change.
The medical device and other medical product industries in the APAC Region generally are subject to comprehensive government regulation and supervision, encompassing the approval, registration, manufacturing, packaging, licensing and marketing of new products. In addition, the regulatory frameworks in the APAC Region regarding our industry are subject to change. Any such changes may result in increased compliance costs on our business or cause delays in or prevent the successful development or launch of our product candidates in the APAC Region. The regulatory authorities in the countries and territories constituting the APAC Region also may launch investigations of individual companies or on an industry-wide basis. The costs and time necessary to respond to an investigation can be material. Any failure by us or our partners to maintain compliance with applicable laws and regulations or obtain and maintain required licenses and permits may result in the suspension or termination of our business activities in certain countries and territories in the APAC Region or in the region as a whole.
Fluctuation in the value of foreign currencies may have a material adverse effect on your investment.
A substantial portion of our revenues and costs may be denominated in foreign currencies, such as the Chinese Renminbi, Australian Dollar or Japanese Yen. Any significant change in value of these foreign currencies against the U.S. dollar may materially affect our cash flows, net revenues, earnings and financial position, and the value of, and any dividends payable on, our common stock in U.S. dollars. For example, an appreciation of any such foreign currency against the U.S. dollar would make any new investments or expenditures denominated in the foreign currency costlier to us, to the extent that we need to convert U.S. dollars into the foreign currency for such purposes. Conversely, a significant depreciation of any such foreign currency against the U.S. dollar may significantly reduce the U.S. dollar equivalent of our earnings, which in turn could adversely affect the price of our common stock. If we decide to convert any such foreign currency into U.S. dollars for the purpose of making payments for dividends on our common stock, strategic acquisitions or investments or other business purposes, appreciation of the U.S. dollar against the foreign currency would have a negative effect on the U.S. dollar amount available to us.
We do not expect to hedge against the risks associated with fluctuations in exchange rates and, therefore, exchange rate fluctuations could have an adverse impact on our future operating results. As a result, fluctuations in exchange rates may have a material adverse effect on your investment.
We may be subject to tax inefficiencies and have not ascertained the impact on us of the new United States tax laws.
The tax regulations of the United States and other jurisdictions in which we operate are extremely complex and subject to change. New laws, new interpretations of existing laws, such as the Base Erosion Profit Shifting project initiated by the Organization for Economic Co-operation and Development and any legislation proposed by the relevant taxing authorities, or limitations on our ability to structure our operations and intercompany transactions may lead to inefficient tax treatment of our revenue, profits, royalties and distributions, if any are achieved. In the United States, in December 2017, comprehensive tax reform was enacted. We have not yet ascertained what impact the new law will have on our future effective tax rate, corporate structure and us in general.
In addition, we and our foreign subsidiaries will have various intercompany transactions. We may not be able to obtain certain benefits under relevant tax treaties to avoid double taxation on certain transactions among our subsidiaries. If we are not able to avail ourselves of the tax treaties, we could be subject to additional taxes, which could adversely affect our financial condition and results of operations.
We are subject to laws and regulations governing business conduct, which will require us to develop and implement costly compliance programs.
We must comply with a wide range of laws and regulations to prevent corruption, bribery, and other unethical business practices, including the FCPA, anti-bribery and anti-corruption laws in other countries. The creation and implementation of international business practices compliance programs is costly and such programs are difficult to enforce, particularly where reliance on third parties is required.
Anti-bribery laws prohibit us, our employees, and some of our agents or representatives from offering or providing any personal benefit to covered government officials to influence their performance of their duties or induce them to serve interests other than the missions of the public organizations in which they serve. Certain commercial bribery rules also prohibit offering or providing any personal benefit to employees and representatives of commercial companies to influence their performance of their duties or induce them to serve interests other than their employers. The FCPA also obligates companies whose securities are listed in the United States to comply with certain accounting provisions requiring us to maintain books and records that accurately and fairly reflect all transactions of the corporation, including international subsidiaries, and devise and maintain an adequate system of internal accounting controls for international operations. The anti-bribery provisions of the FCPA are enforced primarily by the Department of Justice. The SEC is involved with enforcement of the books and records provisions of the FCPA.
Compliance with these anti-bribery laws is expensive and difficult, particularly in countries in which corruption is a recognized problem. In addition, the anti-bribery laws present particular challenges in the medical products industries because in many countries, a majority of hospitals are state-owned or operated by the government, and doctors and other hospital employees are considered civil servants. Furthermore, in certain countries, hospitals and clinics are permitted to sell medical devices to their patients and are primary or significant distributors of medical devices. Certain payments to hospitals in connection with clinical studies, procurement of medical devices and other work have been deemed to be improper payments to government officials that have led to vigorous anti-bribery law enforcement actions and heavy fines in multiple jurisdictions, particularly in the United States and China.
It is not always possible to identify and deter violations, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations.
In the medical products industries, corrupt practices include, among others, acceptance of kickbacks, bribes or other illegal gains or benefits by the hospitals and medical practitioners from medical device manufacturers, distributors or their third-party agents in connection with the prescription of certain medical devices or disposables. If our employees, affiliates, distributors or third-party marketing firms violate these laws or otherwise engage in illegal practices with respect to their sales or marketing of our products or other activities involving our products, we could be required to pay damages or heavy fines by multiple jurisdictions where we operate, which could materially and adversely affect our financial condition and results of operations. Our potential customers also may deny access to sales representatives from medical device companies because the potential customers want to avoid the perception of corruption, which could adversely affect our ability to promote our products.
As we expand our operations in the APAC Region, we will need to increase the scope of our compliance programs to address the risks relating to the potential for violations of the FCPA and other anti-bribery and anti-corruption laws. Our compliance programs will need to include policies addressing not only the FCPA, but also the provisions of a variety of anti-bribery and anti-corruption laws in multiple jurisdictions, including provisions relating to books and records that apply to us as a public company, and will need to include effective training for our personnel throughout our organization. The creation and implementation of anti-corruption compliance programs is costly and such programs are difficult to enforce, particularly where reliance on third parties is required. Violation of the FCPA and other anti-corruption laws can result in significant administrative and criminal penalties for us and our employees, including substantial fines, suspension or debarment from government contracting, prison sentences, or even the death penalty in extremely serious cases in certain countries. The SEC also may suspend or bar us from trading securities on United States exchanges for violation of the FCPA’s accounting provisions. Even if we are not ultimately punished by government authorities, the costs of investigation and review, distraction of company personnel, legal defense costs, and harm to our reputation could be substantial and could limit our profitability or our ability to develop or launch our product candidates. In addition, if any of our competitors are not subject to the FCPA, they may engage in practices that will lead to their receipt of preferential treatment from potential customers and enable them to secure business from potential customers in ways that are unavailable to us.
Changes in the economic, political or social conditions or government policies in the APAC Region could have a material adverse effect on our business and operations.
The economies and societies of certain countries and territories in the APAC Region, continue to undergo significant change. Adverse changes in the political and economic policies in these countries and territories could have a material adverse effect on the overall economic growth of these countries and territories, which could adversely affect our ability to conduct business in these countries and territories. The governments of these countries and territories continue to adjust economic policies to promote economic growth. Some of these measures may benefit the overall economy, but may also have a negative effect on us. As the medical product industry grows and evolves in these countries and territories, the governments may also implement measures to change the structure of foreign investment in this industry. We are unable to predict any such policy changes, any of which could materially and adversely affect our ability to finance or conduct our business in these countries and territories. Any failure on our part to comply with changing government regulations and policies could result in the loss of our ability to develop and launch our product candidates in these countries and territories.
Our customers initially may be concentrated in China, in which case we may be susceptible to risks specifically associated with business activities in China.
We will first seek regulatory approval for the SGT with the NMPA of China. To the extent we have operations in China and our customers initially are concentrated in China, we may be subject to additional risks specific to China that companies do not generally face if they operate primarily outside of China. These risks and uncertainties include:
|●||the Ministry of Commerce in China or its local counterpart must approve the amount and use of any capital contributions from us to our Chinese subsidiary, which may inhibit our ability to contribute additional capital to fund our Chinese operations;|
|●||the Chinese government imposes controls on the convertibility of the Renminbi into foreign currencies and the remittance of foreign currency out of China for certain transactions, which may restrict the ability of our operating subsidiary in China to remit sufficient foreign currency to pay dividends or other payments to us;|
|●||the legal system of China is a civil law system that continues to rapidly evolve, and the laws, regulations and rules are not always uniformly interpreted or enforced, which may limit legal protections available to us;|
|●||our operations in China subject us to various Chinese labor and social insurance laws, and any failure to comply with such laws could subject us to late fees, fines and penalties, or cause the suspension or termination of our ability to conduct business in China; and|
|●||failure to make adequate contributions to various employee benefit plans as required by Chinese regulations may subject us to penalties.|
In the event that we are unable to manage the complications associated with operations in China, our results of operations, financial condition and business prospects could be materially and adversely affected.
Risks Related to this Offering and the Ownership of Our Common Stock
We have broad discretion in the use of the net proceeds from this offering and may use the net proceeds in ways with which you may not agree.
Our management will have broad discretion in the application of the net proceeds from this offering and could spend the proceeds in ways that do not advance our business plan, achieve proposed objectives, improve our financial condition, generate revenue or enhance the value of our common stock. You will be relying on the judgment of our management with regard to the use of these net proceeds, and you will not have the opportunity, as part of your investment decision, to assess whether the net proceeds are being used appropriately. The failure by our management to apply these funds effectively could result in financial losses that could have a material adverse effect on our business, cause the price of our common stock to decline and delay the development of our product candidates. Pending the application of these funds, we may invest the net proceeds from this offering in a manner that does not produce income or that loses value.
We may not be able to satisfy the continued listing requirements of the NYSE American in order to maintain the listing of our common stock.
We must meet certain financial and liquidity criteria to maintain the listing of our common stock on NYSE American. If we violate the NYSE American listing requirements or fail to meet any of the NYSE American’s listing standards, our common stock may be delisted. In addition, while we have no present intention to do so, our Board of Directors may determine that the cost of maintaining our listing on a national securities exchange outweighs the benefits of such listing. A delisting of our common stock from the NYSE American may have materially adverse consequences to our stockholders, including:
|●||a reduced market price and liquidity with respect to our shares of common stock;|
|●||limited dissemination of the market price of our common stock;|
|●||limited news coverage;|
|●||limited interest by investors in our common stock;|
|●||volatility of the prices of our common stock, due to low trading volume;|
|●||our common stock being considered a “penny stock,” which would result in broker-dealers participating in sales of our common stock being subject to the regulations set forth in Rules 15g-2 through 15g-9 promulgated under the Exchange Act;|
|●||increased difficulty in selling our common stock in certain states due to “blue sky” restrictions; and|
|●||limited ability to issue additional securities or to secure additional financing.|
If our common stock is delisted, we may seek to have our common stock quoted on an over-the-counter marketplace, such as on the OTCQX. The OTCQX is not a stock exchange, and if our common stock trades on the OTCQX rather than a securities exchange, there may be significantly less trading volume and analyst coverage of, and significantly less investor interest in, our common stock, which may lead to lower trading prices for our common stock.
Investors in this offering will experience immediate and substantial dilution in net tangible book value.
The difference between the public offering price per share of our common stock and the pro forma net tangible assets per share of our common stock after this offering constitutes the dilution to the investors in this offering. You will incur immediate and substantial dilution as a result of this offering. After giving effect to the conversion at the closing of this offering of our convertible preferred stock and the convertible notes issued by our majority-owned subsidiary, and after giving further effect to the sale by us of all shares of common stock in this offering at an assumed public offering price of $ per share, investors in this offering can expect an immediate dilution to net tangible assets of $ per share, based on a pro forma net tangible book value per share after the offering (which excludes a value for the License Agreement) of $ . This dilution is due in large part to the fact that our existing investors acquired their securities prior to this offering at substantially less than investors are paying in this offering. If any outstanding warrants to purchase shares of our common stock are exercised, there would be further dilution. See “Dilution” for a more complete description of how the value of your investment in our common stock will be diluted upon the completion of this offering.
The market price of our common stock may be significantly volatile.
The market price for our common stock may be significantly volatile and subject to wide fluctuations in response to factors including the following:
|●||developments prior to commercial sales relating to regulatory approval, manufacturing and distribution of our products;|
|●||actual or anticipated fluctuations in our quarterly or annual operating results;|
|●||changes in financial or operational estimates or projections;|
|●||conditions in markets generally;|
|●||changes in the economic performance or market valuations of companies similar to ours; and|
|●||general economic or political conditions in the United States or elsewhere.|
In particular, the market prices for securities of medical device companies have historically been particularly volatile. Some of the factors that may cause the market price of our common stock to fluctuate include:
|●||any delay in or the results of our clinical evaluations;|
|●||any delay in manufacturing of our products;|
|●||any delay with the approval for reimbursement for the patients from their insurance companies;|
|●||our failure to comply with regulatory requirements;|
|●||the announcements of clinical evaluation data, and the investment community’s perception of and reaction to those data;|
|●||the results of clinical evaluations conducted by others on products that would compete with ours;|
|●||any delay or failure to receive clearance or approval from regulatory agencies or bodies;|
|●||our inability to commercially launch products or market and generate sales of our products, including the SGT;|
|●||failure of the SGT or any other products, even if approved for marketing, to achieve any level of commercial success;|
|●||our failure to obtain intellectual property protection for any of our technologies and products (including those related to the SGT) or the issuance of third-party intellectual property that cover our proposed technologies or products;|
|●||developments or disputes concerning our product’s intellectual property rights;|
|●||our or our competitors’ technological innovations;|
|●||general and industry-specific economic conditions that may affect our expenditures;|
|●||changes in market valuations of similar companies;|
|●||announcements by us or our competitors of significant contracts, acquisitions, strategic partnerships, joint ventures, capital commitments, new technologies, or intellectual property;|
|●||failure to adequately manufacture the SGT or any other products through third parties;|
|●||future sales of our common stock or other securities, including shares issuable upon the exercise of outstanding warrants or otherwise issued pursuant to certain contractual rights;|
|●||period-to-period fluctuations in our financial results; and|
|●||low or high trading volume of our common stock due to many factors, including the terms of our financing arrangements.|
In addition, if we fail to reach an important research, development or commercialization milestone or result by a publicly expected deadline, even if by only a small margin, there could be significant impact on the market price of our common stock. Additionally, as we approach the announcement of anticipated significant information and as we announce such information, we expect the price of our common stock to be volatile and negative results would have a substantial negative impact on the price of our common stock.
In some cases, following periods of volatility in the market price of a company’s securities, stockholders have often instituted class action securities litigation against those companies. Such litigation, if instituted, could result in substantial costs and diversion of management attention and resources, which could significantly harm our business operations and reputation.
Shares eligible for future sale may adversely affect the market for our common stock.
The price of our common stock could decline if there are substantial sales of our common stock, particularly sales by our directors, executive officers, employees, and significant stockholders, or when there is a large number of shares of our common stock available for sale.
We have 8,510,000 shares of common stock outstanding as of immediately prior to this offering. We also have a significant number of shares of common stock underlying outstanding preferred stock and warrants of ours and the convertible notes of our subsidiary, GBS Pty Ltd. As of the date of this prospectus: (i) 2,315,891 shares of common stock are issuable upon the completion of this offering by mandatory conversion of such outstanding preferred stock convertible at a one-to-one ratio; (ii) shares of common stock are issuable upon the completion of this offering by mandatory conversion of the convertible notes issued by our majority-owned subsidiary (assuming a public offering price in this offering of $ and based on $ of principal and accrued interest outstanding as of , 2019); and (iii) 2,246,377 shares of common stock are issuable during the one year period commencing on the second anniversary of the completion of this offering by exercise of outstanding warrants that were issued in connection with the issuance of the preferred stock. In addition, upon the closing of this offering, we will issue to the underwriters warrants to purchase shares of our common stock.
Our directors, officers and certain existing stockholders will enter into lock-up agreements pursuant to which, subject to certain exceptions, such persons will not sell shares of our common stock that they own for six months after the date of this prospectus, as further described in “Underwriting.” Notwithstanding the foregoing, the lock-up provisions in these agreements may be waived, at any time and without notice.
Subject to the lock-up agreements, our existing stockholders (including the holders of our preferred stock and warrants and the holders of the convertible notes) may be eligible to sell all or some of their shares of common stock by means of ordinary brokerage transactions in the open market, subject to the limitations of Rule 144, promulgated under the Securities Act of 1933, as amended, or the “Securities Act.” In general, under Rule 144 as currently in effect, once we have been subject to public company reporting requirements for at least 90 days, a person who is not deemed to have been one of our affiliates for purposes of the Securities Act at any time during the 90 days preceding a sale and who has beneficially owned the shares proposed to be sold for at least six months, including the holding period of any prior owner other than our affiliates, is entitled to sell those shares without complying with the manner of sale, volume limitation or notice provisions of Rule 144, subject to compliance with the public information requirements of Rule 144. If such a person has beneficially owned the shares proposed to be sold for at least one year, including the holding period of any prior owner other than our affiliates, then that person is entitled to sell those shares without complying with any of the requirements of Rule 144. Our affiliates and other persons selling shares on behalf of our affiliates also are entitled to sell as long as they comply with Rule 144’s manner of sale, volume limitation and notice provisions, in addition to the provisions applicable to non-affiliates described above.
The market price of the shares of our common stock could decline as a result of the sale of a substantial number of our shares of common stock in the public market or the perception in the market that the holders of a large number of shares intend to sell their shares.
We may undertake additional equity or debt financing that may dilute the shares in this offering.
We may undertake further equity or debt financing. Although we have no commitments as of the date of this offering to issue our securities, we may issue a substantial number of additional shares of our common stock or preferred stock, or a combination of common and preferred stock, to raise additional funds or in connection with any strategic acquisition. The issuance of additional shares of our common stock or any number of shares of our preferred stock:
|●||may significantly reduce the equity interest of investors in this offering;|
|●||may subordinate the rights of holders of common stock if preferred stock is issued with rights senior to those afforded to our common stockholders;|
|●||may cause a change in control if a substantial number of our shares of common stock are issued, which may affect, among other things, our ability to use our net operating loss carryforwards, if any, and most likely also result in the resignation or removal of some or all of our present officers and directors; and|
|●||may adversely affect prevailing market prices for our common stock.|
Similarly, if we issue debt securities, it could result in:
|●||default and foreclosure on our assets if our operating revenues were insufficient to pay our debt obligations;|
|●||acceleration of our obligations to repay the indebtedness even if we have made all principal and interest payments when due if the debt security contains covenants that require the maintenance of certain financial ratios or reserves and any such covenant is breached without a waiver or renegotiation of that covenant;|
|●||our immediate payment of all principal and accrued interest, if any, if the debt security is payable on demand;|
|●||our inability to obtain additional financing, if necessary, if the debt security contains covenants restricting our ability to obtain additional financing while such security is outstanding; and|
|●||our inability to conduct acquisitions, joint ventures or similar arrangements if the debt security contains covenants restricting such transactions or the funding thereof or requiring prior approval of the debt holders.|
We do not currently intend to pay dividends on our common stock in the foreseeable future, and consequently, your ability to achieve a return on your investment will depend on appreciation in the price of our common stock.
We do not anticipate paying any cash dividends to holders of our common stock in the foreseeable future. Consequently, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investments. There is no guarantee that shares of our common stock will appreciate in value or even maintain the price at which our stockholders have purchased their shares.
The determination of the offering price for the shares is more arbitrary compared with the pricing of securities for an established operating company.
There is no direct relationship between the offering price and our assets, book value, net worth, or any other economic or financial criteria. Rather, the price of the shares was derived through negotiations with the underwriters after considering various factors including prevailing market conditions, our future prospects and our capital structure. Although these factors were considered, the determination of the offering price is more arbitrary than the pricing of securities for an established operating company. This price does not necessarily accurately reflect the actual value of the shares or the price that may be realized upon disposition of the shares.
If securities industry analysts do not publish research reports on us, or publish unfavorable reports on us, then the market price and market trading volume of our common stock could be negatively affected.
Any trading market for our common stock will be influenced in part by any research reports that securities industry analysts publish about us. We do not currently have and may never obtain research coverage by securities industry analysts. If no securities industry analysts commence coverage of us, the market price and market trading volume of our common stock could be negatively affected. In the event we are covered by analysts, and one or more of such analysts downgrade our securities, or otherwise reports on us unfavorably, or discontinues coverage or us, the market price and market trading volume of our common stock could be negatively affected.
Our controlling stockholder may exert significant influence over our affairs, including the outcome of matters requiring stockholder approval.
Immediately following completion of this offering, we expect the Licensor, our current controlling stockholder, will control a majority of the total voting power of our outstanding common stock. Accordingly, the Licensor will have the ability to control the election of our directors and the outcome of corporate actions requiring stockholder approval, such as: (i) a merger or a sale of our company, (ii) a sale of all or substantially all of our assets, and (iii) amendments to our certificate of incorporation and by-laws. This concentration of voting power and control could have a significant effect in delaying, deferring or preventing an action that might otherwise be beneficial to our other stockholders and be disadvantageous to our stockholders with interests different from the Licensor. Therefore, you should not invest in reliance on your ability to have any control over our company. With the goal of mitigating such control risks, we have decided not to seek exemption as a “controlled company” from the corporate governance rules of the NYSE American, and therefore will be bound by the same corporate governance principles as other public companies, including the requirement that a majority of our directors be independent and that we maintain audit, compensation and nominating committees comprised of independent directors. However, our decision not to rely on the “controlled company” exemption could change. Although we do not anticipate changing our decision, for so long as a majority of our outstanding common stock is held by the Licensor (or by any other stockholder or group of stockholders), we could choose to rely on this exemption in the future to avoid complying with certain of the NYSE American corporate governance rules, including the rules that require us to have a board comprised of at least 50% independent directors, to have board nominations either selected, or recommended for the board’s selection, by either a nominating committee comprised solely of independent directors or by a majority of the independent directors and to have officer compensation determined, or recommended to the board for determination, either by a compensation committee comprised solely of independent directors or by a majority of the independent directors. Any decision to rely on the “controlled company” exemption will be disclosed in our annual proxy statement.
As an “emerging growth company” under applicable law, we will be subject to lessened disclosure requirements, which could leave our stockholders without information or rights available to stockholders of other public companies that are not “emerging growth companies.”
For as long as we remain an “emerging growth company” as defined in the JOBS Act, we have elected to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including, but not limited to:
|●||not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act;|
|●||reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements; and|
|●||exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved.|
We expect to take advantage of these reporting exemptions until we are no longer an “emerging growth company”. We could be an emerging growth company for up to five years, although circumstances could cause us to lose that status earlier. We will remain an emerging growth company until the earlier of (1) the last day of the fiscal year following the fifth anniversary of the completion of this offering, (2) the last day of the fiscal year in which we have total annual gross revenue of at least $1.0 billion, (3) the date on which we are deemed to be a large accelerated filer, which is the end of the fiscal year in which the market value of our common stock that is held by non-affiliates exceeds $700.0 million as of the end of our most recent second fiscal quarter, and (4) the date on which we have issued more than $1.0 billion in non-convertible debt securities during the prior three-year period.
Because of these lessened regulatory requirements, our stockholders would be left without information or rights available to stockholders of other public companies that are not “emerging growth companies.” In addition, we cannot predict if investors will find our common stock less attractive because we rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may suffer or be more volatile.
Because we have elected to use the extended transition period for complying with new or revised accounting standards for an “emerging growth company” our financial statements may not be comparable to companies that comply with public company effective dates.
We have elected to use the extended transition period for complying with new or revised accounting standards under Section 102(b)(1) of the JOBS Act. This election allows us to delay the adoption of new or revised accounting standards that have different effective dates for public and private companies until those standards apply to private companies. While we are not currently delaying the implementation of any relevant accounting standards, in the future we may avail ourselves of these rights, and as a result of this election, our financial statements may not be comparable to companies that comply with public company effective dates. Because our financial statements may not be comparable to companies that comply with public company effective dates, investors may have difficulty evaluating or comparing our business, performance or prospects in comparison to other public companies, which may have a negative impact on the value and liquidity of our common stock.
Anti-takeover provisions in our charter documents and Delaware law could discourage, delay or prevent a change in control of our company and may affect the trading price of our common stock.
We are a Delaware corporation and the anti-takeover provisions of the Delaware General Corporation Law may discourage, delay or prevent a change in control by prohibiting us from engaging in a business combination with an interested stockholder for a period of three years after the person becomes an interested stockholder, even if a change in control would be beneficial to our existing stockholders. In addition, our amended and restated certificate of incorporation and by-laws may discourage, delay or prevent a change in our management or control over us that stockholders may consider favorable. Our amended and restated certificate of incorporation and by-laws will:
|●||provide for the issuance of “blank check” preferred stock that could be issued by our Board of Directors to thwart a takeover attempt;|
|●||provide that vacancies on our Board of Directors, including newly created directorships, may be filled only by a majority vote of directors then in office;|
|●||provide that stockholders will not be able to take action by written consent, and special meetings of stockholders may only be called by our Chief Executive Officer, our President, our Board of Directors or a majority of our stockholders;|
|●||provide that our stockholders are required to provide advance notice and additional disclosures in order to nominate individuals for election to our Board of Directors or to propose matters that can be acted upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of our company; and|
|●||do not provide stockholders with the ability to cumulate their votes, which limits the ability of minority stockholders to elect director candidates.|
These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock.
As a result of becoming a public company, we will be obligated to develop and maintain a system of effective internal control over financial reporting. We may not complete our analysis of our internal control over financial reporting in a timely manner, or these internal controls may not be determined to be effective, which may harm investor confidence in our company and, as a result, the value of our common stock.
We will be required, pursuant to Section 404 of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting in the second annual report we file with the SEC. This assessment will need to include disclosure of any material weaknesses identified by our management in our internal control over financial reporting. However, our auditors will not be required to formally attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 until we are no longer an “emerging growth company” as defined in the JOBS Act, if we take advantage of the exemptions available to us through the JOBS Act. Even after we cease to be an “emerging growth company,” our auditors will not be required to formally attest to the effectiveness of our internal control over financial reporting unless we are an accelerated filer or a large accelerated filer (as defined under the Exchange Act).
We are in the very early stages of the costly and challenging process of compiling the system and process documentation necessary to perform the evaluation needed to comply with Section 404. In this regard, we will need to continue to dedicate internal resources, engage outside consultants and adopt a detailed work plan to assess and document the adequacy of internal control over financial reporting, continue steps to improve control processes as appropriate, validate through testing that controls are functioning as documented and implement a continuous reporting and improvement process for internal control over financial reporting. As we transition to the requirements of reporting as a public company, we may need to add additional finance staff. We may not be able to complete our evaluation and testing in a timely fashion. During the evaluation and testing process, if we identify one or more material weaknesses in our internal control over financial reporting, we will be unable to assert that our internal controls are effective. We may not be able to remediate any material weaknesses in a timely fashion. If we are unable to complete our evaluation and testing, or if we are unable to assert that our internal control over financial reporting is effective, particularly if we have been unable to remediate any material weaknesses identified, or if or our auditors, when required to do so, are unable to express an opinion that our internal controls are effective, investors could lose confidence in the accuracy and completeness of our financial reports, which could harm our stock price.
We will incur increased costs as a result of operating as a public company and our management will be required to devote substantial time to new compliance initiatives and corporate governance practices. Moreover, our ability to comply with all applicable laws, rules and regulations is uncertain given our management’s relative inexperience with operating United States public companies.
As a public company, and particularly after we are no longer an “emerging growth company,” we will incur significant legal, accounting and other expenses that we did not incur as a private company. The Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the listing requirements of the NYSE American and other applicable securities rules and regulations impose various requirements on public companies. Our management and other personnel will need to devote a substantial amount of time to compliance with these requirements. Moreover, these rules and regulations will increase our legal and financial compliance costs and will make some activities more time-consuming and costly. For example, we expect that these rules and regulations may make it more difficult and more expensive for us to obtain directors’ and officers’ liability insurance, which could make it more difficult for us to attract and retain qualified members of our board of directors. Furthermore, new or changing laws, regulations and standards are subject to varying interpretations in many cases due to their lack of specificity, and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies, which could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. We cannot predict or estimate the amount of additional costs we will incur as a public company or the timing of such costs.
Moreover, our executive officers have little experience in operating a United States public company, which makes our ability to comply with applicable laws, rules and regulations uncertain. Our failure to company with all laws, rules and regulations applicable to United States public companies could subject us or our management to regulatory scrutiny or sanction, which could harm our reputation and stock price.
Our amended and restated certificate of incorporation will provide, subject to limited exceptions, that the Court of Chancery of the State of Delaware will be the sole and exclusive forum for certain stockholder litigation matters, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers, employees or stockholders.
Our amended and restated certificate of incorporation will require, to the fullest extent permitted by law, subject to limited exceptions, that derivative actions brought in our name, actions against directors, officers and employees for breach of fiduciary duty and other similar actions may be brought only in the Court of Chancery in the State of Delaware and, if brought outside of Delaware, the stockholder bringing the suit will be deemed to have consented to service of process on such stockholder’s counsel in any action brought to enforce the exclusive forum provision. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock shall be deemed to have notice of and consented to the forum provisions in our amended and restated certificate of incorporation.
Notwithstanding the foregoing, Section 27 of the Exchange Act creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. In addition, Section 22 of the Securities Act creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. As a result, the exclusive forum provision will provide that the Court of Chancery and the federal district court for the District of Delaware will have concurrent jurisdiction over any action arising under the Securities Act or the rules and regulations thereunder, and the exclusive forum provision will not apply to suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder or any other claim for which the federal courts have exclusive jurisdiction. To the extent the exclusive forum provision restricts the courts in which our stockholders may bring claims arising under the Securities Act and the rules and regulations thereunder, there is uncertainty as to whether a court would enforce such provision. Investors cannot waive compliance with the federal securities laws and the rules and regulations promulgated thereunder.
This exclusive forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or any of our directors, officers, other employees or stockholders, which may discourage lawsuits with respect to such claims. By requiring a stockholder to bring such a claim in the Court of Chancery (or the federal district court for the District of Delaware, in the case of an action under the Securities Act or the rules and regulations thereunder), the exclusive forum provision also may increase the costs to a stockholder of bringing such a claim. Alternatively, if a court were to find the exclusive forum provision contained in our amended and restated certificate of incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, operating results and financial condition.
All statements other than statements of historical fact or relating to present facts or current conditions included in this prospectus are forward-looking statements. Forward-looking statements include, but are not limited to, statements regarding expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. These statements may include words such as “anticipate,” “estimate,” “expect,” “project,” “plan,” “intend,” “believe,” “may,” “should,” “can have,” “likely” and other words and terms of similar meaning, but the absence of these words does not mean that a statement is not forward-looking.
The forward-looking statements contained in this prospectus are based on our current expectations and beliefs concerning future developments and their potential effects on us. These forward-looking statements are subject to a number of risks, uncertainties and assumptions, including those described in “Risk Factors.” Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties and assumptions, the future events and trends discussed in this prospectus may not occur and actual results could differ materially and adversely from those anticipated or implied in the forward-looking statements.
You should not rely upon forward-looking statements as predictions of future events. The events and circumstances reflected in the forward-looking statements may not be achieved or occur. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance, or achievements. Except as required by the federal securities laws, we are under no duty to update any of these forward-looking statements after the date of this prospectus or to conform these statements to actual results or revised expectations.
We estimate that the net proceeds from the sale of the shares of our common stock will be approximately $ million, based on an assumed public offering price of $ per share, and after deducting the underwriting discounts and estimated offering expenses payable by us. We intend to use the net proceeds from the offering as follows:
$ to obtain regulatory approvals, including completing any product development required to meet regulatory requirements and establishing manufacturing facilities with sufficient capacity for clinical evaluation and commercial scale production of the SGT;
|●||$ to market the SGT and establish a distribution network across the APAC Region; and|
|●||$ for working capital and general corporate purposes.|
We expect the net proceeds to be sufficient to enable us to obtain regulatory approvals, including completing the related product development and establishing the related manufacturing facilities, as well as to market the SGT and establish a distribution network across the APAC Region.
This expected use of the net proceeds from this offering represents our intentions based upon our current plans and prevailing business conditions, which could change in the future as our plans and prevailing business conditions evolve. Predicting the cost necessary to develop biosensor devices can be difficult and the amounts and timing of our actual expenditures may vary significantly depending on numerous factors, including the progress of our development, the status of and results from clinical evaluations, any collaborations that we may enter into with third parties and any unforeseen cash needs. As a result, our management will retain broad discretion over the allocation of the net proceeds from this offering.
Pending the use of the net proceeds of this offering, we intend to invest the net proceeds in short-term investment-grade, interest-bearing securities.
We believe that the net proceeds from this offering will allow us to operate for the next months. We do not anticipate generating any revenues for at least 18 months, if at all, from the date of this offering, and our revenues will not immediately be sufficient to finance our ongoing operations. In addition, available resources may be consumed more rapidly than currently anticipated, and there can be no assurance that we will be successful in developing the SGT and generating sufficient revenue in the timeframe set forth above, or at all. We may be unable to meet our targets for regulatory approval and market launch, or we may be unable to generate anticipated amounts of revenue from sales of the system. We may also need additional funding for developing new products and services and for additional sales, marketing and promotional activities. Should this occur, we may need to seek additional capital earlier than anticipated. In the event we require additional capital, there can be no assurances that we will be able to raise such capital on acceptable terms, or at all. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
Since our inception, we have not paid any dividends on our common stock, and we currently expect that, for the foreseeable future, all earnings (if any) will be retained for the development of our business and no dividends will be declared or paid. In the future, our Board of Directors may decide, at their discretion, whether dividends may be declared and paid, taking into consideration, among other things, our earnings (if any), operating results, financial condition and capital requirements, general business conditions and other pertinent facts, including restrictions imposed by foreign jurisdictions on paying dividends or making other payments to us.
The difference between the public offering price per share of our common stock and our pro forma as adjusted net tangible book value per share after this offering constitutes the dilution to investors in this offering. Net tangible book value per share is determined by dividing our net tangible book value, which is our total tangible assets less total liabilities, by the number of outstanding shares of common stock.
At June 30, 2019, our pro forma net tangible book value was $ , or approximately $ per share, after giving effect to the mandatory conversion in connection with this offering of our outstanding preferred stock and the convertible notes issued by our majority-owned subsidiary (assuming a public offering price in this offering of $ and based on $ of principal and accrued interest outstanding as of , 2019).
After giving further effect to the sale of all shares of common stock offered hereby at an assumed public offering price of $ per share, and after deducting the underwriting discounts and estimated offering expenses payable by us, our pro forma as adjusted net tangible book value at June 30, 2019 would have been approximately $ or $ per share, representing an immediate increase in net tangible book value of $ per share to our existing stockholders and an immediate dilution of $ per share to new investors.
The following table illustrates the dilution to the new investors on a per-share basis:
|Assumed public offering price per share||$|
|Pro forma net tangible book value per share before offering||$||$|
|Increase in net tangible book value per share attributable to shares offered hereby||$||$|
|Pro forma as adjusted net tangible book value per share after offering||$|
|Dilution in pro forma net tangible book value per share to investors in offering||$|
Each $1.00 increase (decrease) in the assumed public offering price of $ per share would increase (decrease) our pro forma as adjusted net tangible book deficit per share to new investors by $ , and would increase (decrease) dilution per share to new investors in this offering by $ , assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same, and after deducting the underwriting discounts and estimated offering expenses payable by us. In addition, to the extent any outstanding warrants to purchase shares of our common stock are exercised, new investors would experience further dilution.
If the representative exercises the option to purchase additional shares to cover over-allotments in full, the pro forma as adjusted net tangible book value per share of our common stock after giving effect to this offering would be approximately $ per share, and the dilution in pro forma as adjusted net tangible book value per share to investors in this offering would be approximately $ per share of common stock.
The following table summarizes, as of June 30, 2019, after giving effect to the mandatory conversion in connection with this offering of our outstanding preferred stock and the convertible notes issued by our majority-owned subsidiary (assuming a public offering price in this offering of $ and based on $ of principal and accrued interest outstanding as of , 2019), and assuming the sale of all the shares offered hereby, the differences between the number of shares of our common stock purchased from us, the total cash consideration paid, and the average price per share paid by our existing stockholders and by our new investors purchasing shares in this offering at an assumed public offering price of $ per share, before deducting the underwriting discounts and estimated offering expenses payable by us:
|Shares Purchased||Total Consideration||Average Price|
Each $1.00 increase (decrease) in the assumed public offering price of $ per share would increase (decrease) each of the total consideration paid by new investors and total consideration paid by all stockholders by approximately $ million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the underwriting discounts and estimated offering expenses payable by us. Each increase (decrease) of 1,000,000 shares in the number of shares of common stock offered by us, as set forth on the cover page of this prospectus, would increase (decrease) each of the total consideration paid by new investors and total consideration paid by all stockholders by approximately $ million, assuming that the assumed public offering price remains the same, and after deducting the underwriting discounts and estimated offering expenses payable by us.
If the representative exercises the option to purchase additional shares to cover over-allotments in full, our existing stockholders would own % and our new investors would own % of the total number of shares of our common stock outstanding after this offering.
The above tables and discussion include: (i) 8,510,000 shares of our common stock outstanding as of June 30, 2019; and (ii) the issuance of 2,315,891 shares our common stock upon the mandatory conversion at the closing of this offering of our outstanding preferred stock and shares of our common stock upon the mandatory conversion at the closing of this offering of the convertible notes issued by our majority-owned subsidiary (assuming a public offering price in this offering of $ and based on $ of principal and accrued interest outstanding as of , 2019), and exclude:
|●||2,246,377 shares issuable upon the exercise of outstanding warrants issued in connection with the placement of our Series A Convertible Preferred Stock, at an exercise price of $ per share, which warrants are exercisable only during the one-year period commencing on the second anniversary of the closing of this offering;|
|●||500,000 shares that will become available for future issuance under our 2019 Plan; and|
|●||shares issuable upon the exercise of warrants to be issued to the underwriters upon the closing of this offering.|
The following table sets forth our capitalization as of June 30, 2019:
|●||on an actual basis;|
|●||on a pro forma basis, after giving effect to the mandatory conversion in connection with this offering of our outstanding preferred stock and the convertible notes issued by our majority-owned subsidiary (assuming a public offering price in this offering of $ and based on $ of principal and accrued interest outstanding as of , 2019); and|
|●||on a pro forma basis as adjusted basis, after giving further effect to the sale of shares of common stock in this offering at an assumed public offering price of $ per share, and after deducting the underwriting discounts and estimated offering expenses payable by us.|
You should read this table together with the section of this prospectus entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes included elsewhere in this prospectus.
|As of June 30, 2019|
|Actual||Pro Forma||Pro Forma As Adjusted|
|Stockholders’ equity (deficit):|
|Preferred Stock, $0.01 par value, 2,500,000 shares authorized, 2,064,884 shares issued and outstanding as of June 30, 2019(1)||$||15,033,630||$||$|
|Common Stock, $0.01 par value, 20,000,000 shares authorized, 8,510,000 shares issued and outstanding as of June 30, 2019||$||1,950,001||$||$|
|Ordinary Shares, 1,036,000 shares issued and outstanding to non-controlling interests as of June 30, 2019(2)(3)(4)||$||637,919||$||$|
|Additional paid-in capital||$||(8,713,077||)||$||$||(3)|
|Accumulated Other comprehensive income||$||(216,870||)||$||$|
|Total stockholders’ equity (deficit)||(3,977,138||)||(4)|
|(1)||These shares automatically convert to shares of our common stock in connection with this offering.|
|(2)||These ordinary shares are issued by our 99%-owned subsidiary, GBS Pty Ltd, to non-controlling interests and remain outstanding following the completion of this offering.|
|(3)||These amounts equal the net proceeds raised in the offering , plus the aggregate outstanding principal amount of the convertible notes issued by our 99%-owned subsidiary, GBS Pty Ltd, of $5,277,056 as of June 30, 2019, minus deferred charges and unamortized debt issuance costs to be written off against share capital in connection with this offering of $(2,127,378).|
|(4)||These amounts include the automatic conversion of the foregoing convertible notes into shares of common stock at a price per share equal to 85% of the public offering price in this offering (or $ , assuming a public offering price of $ ).|
The table above assumes no exercise by the representative of the over-allotment option and excludes the following securities:
|●||2,246,377 shares issuable upon the exercise of outstanding warrants issued in connection with the placement of our Series A Convertible Preferred Stock, at an exercise price of $ per share, which warrants are exercisable only during the one-year period commencing on the second anniversary of the closing of this offering;|
|●||500,000 shares that will become available for future issuance under our 2019 Plan; and|
|●||shares issuable upon the exercise of warrants to be issued to the underwriters upon the closing of this offering.|
Prospective investors should read the following discussion and analysis of our financial condition and results of operations together with our consolidated financial statements and the related notes and other financial information included elsewhere in this prospectus. Some of the information contained in this discussion and analysis or set forth elsewhere in this prospectus, including information with respect to our plans and strategy for our business, includes forward-looking statements that involve risks and uncertainties. See “Cautionary Note Regarding Forward-Looking Statements.” You should review the “Risk Factors” section of this prospectus for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.
On November 5, 2017, we effected a 1-for-90,000 stock split resulting in 9,000,000 outstanding shares of common stock as of such date. On August 8, 2018, we effected a 1-for-0.9167 reverse stock split that resulted in our having 8,250,000 outstanding shares of common stock. On November 24, 2018, we issued a further 260,000 shares of common stock in exchange for the cancellation of $1,950,000 in debt, resulting in 8,510,000 outstanding shares of common stock as of such date.
On June 27, 2019, the Licensor, our controlling stockholder, transferred a total of 36,600 shares of our common stocks to a total of 122 employees of the Licensor and related companies, and on September 2, 2019, the Licensor transferred a total of 42,000 shares of our common stocks to a total of 140 employees of the Licensor and related companies, in each case pursuant to Regulation S under the Securities Act. Therefore, as at the date of this prospectus, the Licensor owns a total of 8,181,400 common stock of our common stock representing 99.1% of our outstanding common stock.
We are a biosensor diagnostic technology company with licensed rights to introduce and launch a novel, patent-protected saliva glucose monitoring system (referred to as the “SGT”) across the APAC Region. We were formed on December 5, 2016, as a Delaware corporation with headquarters in New York City.
We currently are a 99.1%-owned subsidiary of Life Science Biosensor Diagnostics Pty Ltd (referred to as the “Licensor”), an Australian company that owns the worldwide intellectual property rights to the biosensor platform from University of Newcastle, Australia. The Licensor has licensed to us that technology for us to introduce and launch the platform in the APAC Region. We will commence this process with the SGT.
The consolidated financial statements show a loss of $5,020,383 from July 1, 2017 through June 30, 2018 and a loss of $(7,336,686) from July 1, 2018 through June 30, 2019. We have funded our operations to date with the net proceeds from private placements outside of the United States in the amount of $16,916,179 of Series A Preferred Stock and $5,277,056 in aggregate outstanding principal amount of convertible notes issued by our 99%-owned subsidiary GBS Pty Ltd. Net shareholder’s equity was $(3,063,694) as of June 30, 2018 and $(3,977,138) as of June 30, 2019.
Critical Accounting Policies
Our consolidated financial statements are prepared using the accrual basis of accounting in accordance with Generally Accepted Accounting Principles in the United States, or “United States GAAP.” Our fiscal year ends June 30.
This Management’s Discussion and Analysis of Financial Condition and Results of Operations discusses our consolidated financial statements, which have been prepared in accordance with U.S. GAAP. The preparation of these consolidated financial statements requires making estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements, as well as the reported revenues and expenses for the reporting periods. On an ongoing basis, we evaluate such estimates and judgments. We base our estimates on historical experience and on various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ (perhaps significantly) from these estimates under different assumptions or conditions.
While all the accounting policies impact the consolidated financial statements, certain policies may be viewed to be critical. Our management believes that the accounting policies which involve more significant judgments and estimates used in the preparation of our consolidated financial statements, include revenue recognition, liability related to certain warrants, and contingent liabilities.
We have not generated any revenues to date.
Revenues from product sales would be recognized in accordance with ASC 605-10, “Revenue Recognition”, when delivery has occurred, persuasive evidence of an agreement exists, the vendor’s fee is fixed or determinable, no further obligation exists and collectability is probable. We do not intend to grant a right of return. We will assess whether the fee is fixed or determinable based on the nature of the fee charged for the products delivered, the existing contractual arrangements and the distributor’s consistency of payments. When evaluating collectability, we consider whether we have sufficient history to reliably estimate the distributor’s payment patterns.
If a sales arrangement were to contain multiple elements, such as software and non-software components, we would allocate revenue to each element based on a selling price hierarchy as required according to ASC 605-25, “Multiple-Element Arrangements”, or ASC 605-25. The selling price for a deliverable will be based on its Vendor Specific Objective Evidence, or VSOE, or, if available, third party evidence, or TPE, if VSOE is not available, or estimated selling price, or ESP, if neither VSOE nor TPE is available. The best estimate of selling price is established considering several internal factors including, but not limited to, historical sales, pricing practices and geographies in which we offer our products. The determination of ESP is judgmental.
Revenues from software components in sales arrangements containing multiple elements will be recognized when all criteria outlined in ASC 985-605, “Software Revenue Recognition”, or ASC 985-605, are met (when persuasive evidence of an arrangement exists, delivery of the product has occurred or the services have been rendered, the fee is fixed or determinable and collectability is probable).
For multiple element arrangements within ASC 985-605, revenues will be allocated to the different elements in the arrangement under the “residual method” when VSOE of fair value exists for all undelivered elements and no VSOE exists for the delivered elements. Under the residual method, at the outset of the arrangement with the customer, we will defer revenue for the fair value of its undelivered elements and recognize revenue for the remainder of the arrangement fee attributable to the elements initially delivered in the arrangement when the basic criteria in ASC 985-605 have been met. Any discount in the arrangement will be allocated to the delivered element.
Since VSOE does not exist for undelivered elements, revenues will be recognized as one unit of accounting, on a straight-line basis over the term of the last deliverable based on ASC 605-15 and ASC 985-605.
Liability Related to Certain Warrants
The fair value of the liability for certain warrants previously issued to investors will be calculated after the closing of this offering when the events have occurred to allow a fair value to be determined for these securities.
Fair value for each reporting period will be calculated based on the following assumptions:
|●||Risk-free interest rate — based on yield rates of non-index linked United States Federal Reserve treasury bonds.|
|●||Expected volatility —based on our actual historical stock price movements together with companies in the same industry over a term that is equivalent to the expected term of the option.|
|●||Expected life — the expected life was based on the expiration date of the warrants.|
|●||Expected dividend yield — we do not expect to pay dividends to our shareholders in the foreseeable future.|
We account for our contingent liabilities in accordance with ASC 450 “Contingencies.” A provision is recorded when it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated. With respect to legal matters, provisions are reviewed and adjusted to reflect the impact of negotiations, estimated settlements, legal rulings, advice of legal counsel and other information and events pertaining to a particular matter. Currently, we are not a party to any ligation that we believe could have a material adverse effect on our business, financial position, results of operations or cash flows.
Extended Transition Period for “Emerging Growth Companies”
We have elected to use the extended transition period for complying with new or revised accounting standards under Section 102(b)(1) of the JOBS Act. This election allows us to delay the adoption of new or revised accounting standards that have different effective dates for public and private companies until those standards apply to private companies. As a result of this election, our financial statements may not be comparable to companies that comply with public company effective dates. Because our financial statements may not be comparable to companies that comply with public company effective dates, investors may have difficulty evaluating or comparing our business, performance or prospects in comparison to other public companies, which may have a negative impact on the value and liquidity of our common stock.
Results of Operations
We have not generated any material revenues to date and have not generated any revenues to date from sales of our intended products.
General & Administrative Expenses
During the fiscal year ended June 30, 2019, our general and administrative expenses increased by $256,825, to $2,209,373, compared to general and administrative expenses of $1,952,548 for the fiscal year ended June 30, 2018. The main contribution to this increase was IPO related cost of $282,438, Consultancy cost of $258,140, Insurance expenses of $212,355, Travel and accommodation expenses of $63,121, and reduction of overhead contribution expenses of $607,647.
As our operating activities increase, we expect our general and administrative costs will include additional cost in overhead contribution, consultancy and insurance expenses.
Research & Development Expenses
During the fiscal year ended June 30, 2019, our research and development expenses increased by $654,066, to $3,179,864, compared to research and development expenses of $2,525,798 for the for the fiscal year ended June 30, 2018. The increase in the research and development expenses was primarily driven by the stage of research and development where the final research and development milestone was met, and the stage now moves to regulatory approval.
As our operating activities increase, we expect our research and development costs to be replaced by regulatory approval costs. See “Use of Funds.”
During the fiscal year ended June 30, 2019, our interest expense increased by $210,968, to $664,840, compared to interest expense of $453,872 for the for the fiscal year ended June 30, 2018. The increase in interest expense was primarily driven by an increase in the amortization of debt component cost of capital raising cost.
Audit and Accountancy
During the fiscal year ended June 30, 2019, our audit and accountancy fees increase by $176,165, to $281,890 compared to audit and accountancy fees of $105,725 for the for the fiscal year ended June 30, 2018. The increase in audit and accountancy fees was primarily driven by the need to produce quarterly financial reports.
During the fiscal year ended June 30, 2019, our director fees increased by $16,337, to $16,337, compared to director fees of $0 for the fiscal year ended June 30, 2018. The increase in director fees was primarily due to payments of director fees starting December 2018.
Prospectus & Capital Raising Expenses
During the fiscal year ended June 30, 2019, our prospectus and capital raising expenses increased by $896,174, to $896,174, compared to prospectus and capital raising expenses of $0 for the fiscal year ended June 30, 2018. The increase in prospectus and capital raising expenses expense was primarily due to legal fees incurred to ensure compliance.
During the fiscal year ended June 30, 2019, our rent expense increased by $5,942, to $25,338, compared to rent expense of $19,396 for the fiscal year ended June 30, 2018. The increase in rent expense was primarily driven by the relocation of the office in November 2017.
Employee Benefit Expense
During the fiscal year ended June 30, 2019, our employee benefit expense increased by $120,749, to $120,749, compared to employee benefit expense of $0 for the fiscal year ended June 30, 2018. The increase in employee benefit expense was due to mainly to the Company employing staff, the earliest starting April 2019.
Liquidity and Capital Resources
As of June 30, 2018 and 2019, we had $418,420 and $197,940, respectively, in cash and cash equivalents.
We have experienced cumulative losses from inception to date, which totaled $5,332,055 through June 30, 2018 and $12,668,741 through June 30, 2019. We had a stockholders’ equity position of $(3,063,694) and $(3,977,138) at June 30, 2018 and 2019, respectively. In addition, we have not completed our efforts to establish a source of revenues sufficient to cover our operating costs and expect to continue to generate losses for the foreseeable future. There is no assurance that we will be able to obtain an adequate level of financing needed for our near-term requirements or the product development to ultimately generate sales. Due to these conditions, our ability to continue as a “going concern” depends in part on our ability to raise sufficient capital. See Note 1 to Consolidated Financial Statements for the fiscal year ended June 30, 2019.
Since inception, we have financed our operations primarily through funding from our controlling stockholder, along with a private placement of convertible notes of our 99%-owned subsidiary GBS Pty Ltd and a private placement of our Series A Convertible Preferred Stock accompanied by warrants. The convertible notes bear interest at 7% per annum and are mandatorily convertible to common stock at a 15% discount to the price per share in this offering. The Series A Convertible Preferred Stock are mandatorily convertible into common stock at a one-to-one ratio upon completion of this offering. A warrant to purchase one share of our common stock was issued along with each share of Series A Convertible Preferred Stock. Each warrant is exercisable at the price per share in this offering during the one year period commencing on the second anniversary of the completion of this offering, and the underlying common stock must be held at the time of exercise. As of the date of this prospectus, we have raised a total of $5,277,056 from the sale of convertible notes issued by our majority-owned subsidiary, GBS Pty Ltd, and a total of $16,916,179 from the sale of our Series A Convertible Preferred Stock.
In addition, should we encounter a scenario whereby sufficient capital is not available, the two shareholders of our controlling stockholder have committed to provide sufficient financial assistance to us as and when it is needed for us to continue our operations until July 2020. This financial assistance includes refraining from seeking repayment of any intercompany loans or balances due from us except to the extent funds become available. We expect that any loans or deferrals of amounts due in connection with this financial assistance will be made on an interest free basis.
According to our management’s estimates, based on our budget and proposed schedules of development, approvals and organization, we believe, although there can be no assurances, that after this offering we will have sufficient capital resources to enable us to continue to implement our business plan and remain in operation for at least 30 months. During this time, we expect to use the net proceeds available to us for the following purposes:
|●||to obtain regulatory approvals and establish manufacturing capacities necessary for marketing of the SGT;|
|●||to market the SGT and establish a distribution network in the APAC Region; and|
|●||for working capital and general corporate purposes.|
We do not anticipate generating any revenues for at least 18 months, if at all, from the date of this offering, and our revenues will not immediately be sufficient to finance our ongoing operations. In addition, available resources may be consumed more rapidly than currently anticipated, and there can be no assurance that we will be successful in developing the SGT and generating sufficient revenue in the timeframe set forth above, or at all. We may be unable to meet our targets for regulatory approval and market launch, or we may be unable to generate anticipated amounts of revenue from sales of the system. We may also need additional funding for developing new products and services and for additional sales, marketing and promotional activities. Should this occur, we may need to seek additional capital earlier than anticipated.
In the event we require additional capital, there can be no assurances that we will be able to raise such capital on acceptable terms, or at all. Failure to generate sufficient revenues or raise additional capital through debt or equity financings, or through collaboration agreements, strategic alliances or marketing and distribution arrangements, could have a material adverse effect on our ability to meet our long-term liquidity needs and achieve our intended long-term business plan. Our failure to obtain such funding when needed could create a negative impact on our stock price or could potentially lead to a reduction in our operations or the failure of our company.
Controls and Procedures
We are not currently required to maintain an effective system of internal control over financial reporting as defined by Section 404 of the Sarbanes-Oxley Act. As public company, we will be required to comply with the internal control requirements of the Sarbanes-Oxley Act. In addition, commencing with our annual report for the fiscal year ending June 30, 2021, we will be required to furnish a report by management on the effectiveness of our internal control over financial reporting. As of the date of this prospectus, we have not completed an assessment of, nor have our auditors tested, our system of internal control over financial reporting.
Off-Balance Sheet Arrangements
We did not have during the period presented, and we do not currently have, any off-balance sheet arrangements as defined under SEC rules.
We are a biosensor diagnostic technology company operating in the APAC Region. We were incorporated under the laws of Delaware on December 5, 2016. Our headquarters are located in New York, New York.
Our biosensor technology is licensed from the Licensor, Life Science Biosensor Diagnostics Pty Ltd. This technology is patent protected and described in two granted patents: United States patent 9,766,199 and China patent ZL201380022888, both expiring year 2033. The Licensor is an Australian company that acquired all the intellectual property to the biosensor platform that relates to the life sciences, from the University of Newcastle, Australia, Center for Organic Electronics, or the “COE,” where the biosensor technology was invented and developed. The Licensor currently owns 99.1% of our outstanding common stock and will own a majority of our outstanding common stock immediately after this offering.
Our objective is to introduce and launch the Saliva Glucose Biosensor (referred to as the “SGB”), the first of our diagnostic tests that stem from the Biosensor Platform that we license, in the APAC Region.
The SGB uses saliva to measure glucose non-invasively. When the SGB interacts with saliva, an electrochemical reaction is initiated that produces an electrical signal directly correlated to the amount of glucose present in the saliva. This measurement is then converted into a real-time saliva glucose reading by a software app on a smart device or a dedicated smart reader for those that do not possess a compliant and compatible smart device. The reading may then be stored in our proprietary cloud-based digital information system.
Figure 5: Using the Saliva Glucose Biosensor (for illustration purposes only)
The APAC Region includes over 164 million people living with diabetes, which accounts for 38% of the world’s diabetic population. Rapid urbanization, unhealthy diets and increasingly sedentary lifestyles have resulted in ever increasing rates of obesity and diabetes across the region. The following table shows the countries and territories constituting the APAC Region, where we will introduce, market and launch the biosensor:
|Country / Territory|
|Other Asia countries|
|South Pacific region (18 nations)|
Figure 6: The APAC Region
Self-testing blood glucose monitors were introduced to the market in the 1970s and, since then, the method of glucose self-monitoring has not meaningfully changed. The industry remains dominated by invasive methods that ultimately use blood or interstitial fluid to measure glucose. We believe the methodology of the SGB represents a breakthrough in glucose monitoring as it represents the only non-invasive, painless and cost-effective saliva-based method of measuring glucose levels. The biosensor technology has been developed over several decades of university-based scientific research and has been extensively referenced in scientific literature. For more detail on this research, see “—The Saliva Glucose Test.”
The SGB is an organic transistor, which in its structure embeds the glucose oxidase enzyme (referred to as “GOX”). When the single-use SGB interacts with saliva it initiates an electrochemical reaction, producing an electrical signal directly correlated to the amount of glucose present in the saliva. This measurement is then converted into a real-time saliva glucose reading, through the biosensor app installed on a smart device or a dedicated reader.
The patent protected SGB is able to detect glucose in saliva at concentrations between 8 and 200 µM and exhibits linear glucose sensing characteristics at these concentrations, sensing glucose at levels 100 times lower than blood.
In our development of the SGT, we aim to go beyond the innovation of changing the sampling medium from blood to saliva, and further create value for the patient and the payers by decreasing the cost of managing diabetes, improving the outcomes of the disease and providing convenience in testing methodology. This will be achieved by directly transferring the SGB reading from the smart device or dedicated reader to our proprietary digital information system, which is cloud-based to enable every patient the option to create their own medical record where the SGB results will be uploaded.
Our digital information system is intended to be interfaced to an artificial intelligence system and will be able to, at the patient’s or authorized carer’s direction, disseminate patient data to a remote caregiver, a service for consultation or to any other individual with whom the patient chooses to share his or her glucose level measurements. We believe patients and payers will be able to leverage our digital information system to decrease cost and improve outcomes and convenience.
The SGB drives economic value beyond the revenue stemming from the sale of the SGB units – it also allows for monetization and the creation of separate revenue streams from the patient network and other data that resides within our digital information system, by way of the following:
|●||Data usage. The usage of the data, and the analysis and interpretation of the data, to improve patients’ conditions and leveraging this insight to improve patient care.|
|●||Safe data sharing. The provision of data sharing services between users/patients, authorized carers and authorized medical practitioners.|
|●||Data collection. The collection of anonymized data, its aggregation with other data from multiple sources and multiple health devices and its combination with non-health data.|
We plan to leverage this usage, safe sharing and collection of data in the following four revenue-generating channels:
|1.||Direct Monetization Channel. This channel focuses on the development of revenue based on commercial relationships for the use of anonymized and compliant information derived from data generation. These services may include, but will not be limited to:|
|●||Fee for service, per performed action by pharma, or other commercial partner.|
|●||Subscription, regular recurring payments for continued access to service.|
|●||Prescription, value acknowledged by payer reimbursement per active user.|
|●||Third party coverage, other industry/retail players pay fee for their own customers.|
|●||Risk sharing/profit sharing, success-based payment models.|
|●||Advertising, third party ads tailored to demographic data leveraging characteristics unique to channel.|
|●||Added value for GBSG brand loyalty.|
|2.||Commercial Adjacencies Channel. This channel focuses on the development of revenue from data generated through patient engagement and market insights from a clinical and medical perspective. These services may include, but will not limited to:|
|●||Medical – Generation of Patient Reported Outcomes, or “PROs.”|
|●||Data – Market insights, clinical trial recruitment for third parties, e.g., pharmaceutical companies or clinical research organizations.|
|●||Consumer – e-commerce platform, third party customer care, advertising.|
|3.||Product and Service Bundles Channel. This channel focuses on ancillary revenue generated through bespoke service opportunities across the industry, for example, by working with insurers to develop products that integrate the usage of testing as part of their service offering. These services may include, but will not be limited to:|
|●||Bundle payment model with insurance subsidy.|
|●||Pay for outcomes model.|
|4.||Core Operations Synergy Channel. Through combining the data generation with the use of artificial intelligence, we expect to have a deep insight into our customer base, providing a high level of customer insight. It is expected that this insight will drive a high customer retention levels and generate a considerable number of broader revenue opportunities through direct and specific interaction with our customer base. These opportunities may include, but will not be limited to:|
|●||Direct access to customers for better experience in customer care.|
|●||Peer learning and support to decrease customer care resource commitment.|
|●||Direct market and customer insights (including better understanding of customer journey).|
|●||More customer data for targeted marketing & marketing impact monitoring.|
|●||New cost effective, digital marketing channel enabling agile marketing approach.|
|●||PRO data to support unique marketing claims.|
|●||Higher engagement, customer loyalty and customer lifetime value.|
|●||Consumer driven innovation and customer involvement in development.|
|●||Involvement in testing & refining to develop demand-oriented products rapidly.|
|●||Easy and fast clinical evaluation recruitment.|
|●||PRO to support regulatory approval/ market access for platform tests under development.|
The SGB development program is currently at the stage of implementation of the clinical evidence module, which incorporates the commercial production of the investigative biosensor devices to commence the clinical evaluation of analytical performance of the device and generate the clinical evidence necessary to gain regulatory approval. Within the Asia Pacific region, China has the highest number of people with diabetes and we will first seek regulatory approval with the NMPA of China. However, we intend to apply for regulatory approval in each jurisdiction across the APAC Region.
The SGB is manufactured using modified reel-to-reel printing technology that was developed at the Australian National Fabrication Facility. See Figure 7 below for a depiction of reel-to-reel printing. This technology allows mass volume printing at a low cost. Previous research published in the journal Solar Energy Materials and Solar Cells has shown that the cost of manufacture of printed organic electronic devices (like the SGB) using mass volume printing is $7.85 per square meter, with an uncertainty of 30%. The size of the printed biosensors is approximately one square centimeter, resulting in a manufacturing cost per biosensor of approximately $0.001.
Figure 7: Biosensor manufacture at the Australian National Fabrication Facility
We anticipate that the non-invasive nature of saliva-based glucose testing will make patients more amenable to glucose monitoring, with the expected result of increasing the number of times a patient tests per day. The data generated by the SGB, combined with the interface of the smart device or dedicated reader with our digital information system and the artificial intelligence feedback, will allow the patient to achieve better glucose control through a practical understanding of lifestyle factors that affect glucose levels, thereby helping prevent or delay diabetes complications and ultimately personalizing diabetes management. See Figure 8 below.
Figure 8: Our digital information system (for illustration purposes only)
The proceeds generated from this offering will accelerate and enhance the establishment of our business across the APAC Region.
The IQ Group Global
The iQ Group Global is a group of companies engineered specifically to facilitate the advancement of bioscience research and development through the efficient deployment and integration of capital resources and customized financial instruments with advanced research development tools that enable the competent translation from a preclinical research and development model in the laboratory to a therapeutic drug in the clinic. The iQ Group Global incorporates four stock exchange listed Australian companies:
|●||iQnovate (NSX:IQN) is a scientifically driven life science asset management organization. It has strong organic research and development capability. This enables iQnovate to conceptualize, source, validate and commercialize biotechnology assets that have potentially disruptive outcomes, thus advancing human health.|
|●||iQX (NSX:IQX) is a listed investment and funds management company specializing in the life science sector. Its team includes investment managers, physicians and scientists who are committed to eradicating disease through capital investment. iQX Investment Services Pty Ltd, a wholly owned subsidiary, is the holder of the Australian Financial Services License. It is the fund manager for the iQ Series 8 Life Science Fund. The Fund is now closed and invested in the areas of biotechnology innovations.|
|●||FarmaForce (ASX:FFC) is a contract sales organization that provides results-driven pharmaceutical sales and patient support solutions to the Australian healthcare market.|
|●||iQ3Corp (ASX:IQ3) is a boutique life science corporate finance and advisory firm, providing services exclusively to life science companies and advising them on their most critical strategic corporate decisions, including initial public offerings, capital raising, restructurings and recapitalizations, M&A and corporate strategy.|
|●||Clinical Research Corporation, or “CRC,” provides strategic clinical development and medical affairs services to the bioscience industry throughout the entire drug development life cycle.|
|●||iQ Capital is an early stage United States-based investment banking business dedicated to raising capital for the biosciences sector.|
Life Science Biosensor Diagnostics Pty Ltd (referred to as the “Licensor”) is a subsidiary of both iQnovate (81% ownership) and iQX (19% ownership). The Licensor owns the worldwide rights to the Biosensor Platform technology, including the rights licensed to us. The Licensor currently owns 99.1% of our outstanding shares of common stock and will own a majority of our outstanding common stock after this offering.
Biosensor Platform Technology
The “Biosensor Platform” on which the SGB is based is a modified Organic Thin Film Transistor, or “OTFT,” architecture. Figure 9 below illustrates the basic OTFT structure that consists of a source (B) and drain electrode (H), a semiconducting layer (C), a gate electrode (E), an optional separation (or dielectric) layer (D) all printed on a substrate material (A) and superimposed by a polyelectrolyte membrane/enzyme layer (F) onto which the analyte (G) is placed. The layered biosensor architecture and fabrication allows the recognition element within the biosensor (G) to be exchanged.
Figure 9: OTFT architecture
Therefore, the GOX element of the biosensor used to detect glucose in the case of the SGB can be substituted with antibodies specific to cancer biomarkers, immunological tests, hormones and other biomarkers.
The Saliva Glucose Test
In our research and development pipeline, the diagnostic test at the most advanced stage is the SGT. It is contemplated and intended that this will be the first test to launch in market. The SGT consists of:
|●||the SGB – a single use disposable saliva biosensor, and|
|●||software app on a smart device or a dedicated reader that interfaces the SGB with our digital information system.|
Figure 10: The Saliva Glucose Test (for illustration purposes only)
The Saliva Glucose Biosensor
The SGB was invented at the COE at the University of Newcastle, Australia. Patents for the SGB technology have been granted in the United States (9,766,199) and China (ZL201380022888). The core innovative characteristic of the SGB is the sensitivity of the glucose biosensor that enables it to detect glucose in saliva at concentrations between 8-200 µM and exhibits linear glucose sensing characteristics at these concentrations, sensing glucose at levels 100 times lower than in blood.
Figure 11: The Saliva Glucose Biosensor Strip Biosensor
The SGB interacts with the glucose in the saliva and initiates an electrochemical reaction, producing an electrical signal directly correlated to the amount of glucose present in the saliva. This measurement is then converted into a real-time saliva glucose reading, through the software app installed on a smart device or a dedicated smart reader. The data may then be transferred to our digital information system coupled with an artificial intelligence system, which will provide the patient with personalized healthcare advice enabling a practical understanding of lifestyle factors that may affect their glucose levels.
The SGB utilizes the GOX enzyme for signal generation. The enzyme acts on glucose, triggering a series of reactions that yields two protons (i.e., electrical current) for each interaction with a substrate molecule. The biosensor therefore produces an electrical current (i.e., signal) that is proportional to the concentration of glucose in the sample. The GOX enzyme is well-suited for monitoring glucose levels and it has been used extensively in commercially available products. Its mode of action, including the direct signal correlation with the amount of glucose, has been reviewed in numerous scientific journal articles, including in Biosensors and Bioelectronics, International Journal of Biochemistry & Cell Biology and Journal of Diabetes Science and Technology. Additional scientific journal articles in Applied Physics Letters have described the biophysical characterization of the SGB and further support the claim that its signal directly correlates with the glucose concentration in the sample.
The direct correlation between glucose concentration and sensor signal is independent of the type of sample under examination (i.e., blood or saliva). The use of saliva as a meaningful proxy for estimating blood glucose level is supported by extensive scientific literature that has investigated the physiological glucose concentration in both biological fluids and overwhelmingly reported a strong correlation, including in articles published in independent journals such as the Journal of Obesity, the Journal of International Oral Health, the Journal of Clinical and Experimental Dentistry, the Journal of Oral Biology and Craniofacial Research, Diabetes & Metabolic Syndrome, the Journal of Biological Regulators and Homeostatic Agents and Diabetologia, among others. However, a few isolated articles have reported finding no significant correlation, including articles in the Journal of Clinical and Diagnostic Research and Journal of Oral Science. Overall, we believe there is abundant clinical evidence in independently reviewed scientific literature that saliva can be utilized as a non-invasive alternative to blood to monitor glycemic status in diabetic patients.
The basic OTFT structure (see Figure 12 below) consists of a source and drain electrode on a semiconducting material which is itself separated from a third gate electrode by a thin insulating layer. The COE has pioneered the fabrication of these novel biosensors based on integrating biomolecules, such as enzymes, directly into the architecture of organic transistors; producing electronic devices with both high sensitivity and high specificity for the target analyte. In these biosensors, a molecular recognition element can simply be integrated directly into the device structure, and in the case of the SGB, the recognition element is GOX.
Figure 12: The OTFT Structure
High quality OTFTs have been routinely fabricated at the materials node of the Australian National Fabrication Facility. The COE has pioneered the fabrication of novel biosensors based on integrating biomolecules, such as enzymes, directly into the architecture of organic transistors; producing electronic devices with both high sensitivity and high specificity for the target analyte and in this case, glucose.
The development of an intermediate device that communicates to the smart device has been completed. The intermediate device emulates a glucometer, providing the mechanical and electrical interfaces to receive and power the SGB as well as the required circuitry for accurately reading the amperometric signals. We intend to transfer the responsibilities of the intermediate device to the SGB. A possible route to achieve this technical aim is to leverage near-field-communication, or “NFC,” tags, available off the shelf and routinely used in consumer electronics, to power the SGB and implement the communication protocol. NFC tags are compatible with flexible electronics and widely used in “internet of things” applications in view of their low cost. We believe that NFC tags suitable for integration with the SGB can be purchased for approximately $0.10 per tag, even at low volumes. The cost of electronic components is well known to significantly reduce as volume increases. Due to the large expected volumes of the SGB, we believe it is reasonable to assume that the cost of suitable NFC tags will be viable and less than $0.04.
The Licensor owns patents in Australia, China and the United States protecting the following technological claims of the SGB: the architecture of a biofunctional organic thin film transistor device comprising a gate electrode, a dielectric layer, a partially-organic semiconducting layer, a source electrode, a drain electrode, a substrate and an enzyme; the method for producing the organic thin film transistor device; and the method for determining the concentration of a compound in a sample by interpreting the amperometric signals generated by the device. The Chinese and the United States patent belong to the same patent family, originating from the Australian patent. As such, all of the patents relate to identical technology claims.
History and Background of the Saliva Glucose Biosensor
The SGB leverages the decades of history of all-polymer printed OTFTs. Through the research conducted at COE, this OTFT technology has been transformed into a medical device and expected to conform to the highest medical device standards globally. Figure 13 below shows the research and development journey of the biosensor from 1997 to 2018.
Figure 13: Development history of the Saliva Glucose Biosensor
The SGB is based on a modified OTFT architecture incorporating GOX as the recognition element. It has been demonstrated that the SGB exhibits linear glucose sensing at concentrations of 8-200 µM (micro molar) offering a saliva-based test for diabetic monitoring and diagnosis.
Fundamentals of the biosensor technology have been well-characterized and have deep scientific foundations. Since their invention in 1947, transistors have dominated the mainstream microelectronics industry. Field Effect Transistors, or “FETs,” are a class of transistor in which the current between a pair of source and drain electrodes separated by a semiconductor is controlled by a voltage applied to a third electrode known as the gate. The gate electrode is separated from the source-drain region by a thin (~100 nm) insulating dielectric region and thus is coupled to the semiconductor. By altering the bias voltage applied to the gate region, the source-drain region can be altered from conducting to insulating and thus the device can be turned on or off. Importantly, the presence of a relatively small number of charges on the gate electrode alters the flow of a great many charges between the source and drain electrodes. Accordingly, the FET acts as a switch as well as an amplifier.
The SGB integrates another scientific discovery known as organic electronic polymers. This work, which was conducted in the 1970s, focused on the development of doped polyacetylene. Historically conductive polymers can also be traced back to the early 1960s. Conductive polymers have several advantages over other organic conductors with regard to their processability and hence their use is becoming increasingly widespread. The polymers that show the most promise in this area are based on the polythiophene structure. The flexible nature of these polymers allows them to be processed into almost any desired shape or form, making them attractive for the low-cost production of flexible electronic circuits, such as FETs.
The first demonstrated combination of FETs and organic electronic polymers was in the solid-state OTFT developed in 1986 using polythiophene (an organic electronic polymer) as the semi-conducting layer, with a similar device being reported in 1988. The performance of OTFTs in comparison with conventional silicon-based transistors has been considered encouraging and they have already been used in applications in logic circuits or as the driving elements in active matrix displays. Biosensor fabrication based on organic electronics is also well-established, primarily driven by the appealing features offered by these materials such as flexible and adjustable chemical properties, and room temperature operation.
One of the most attractive features of organic electronics is the potential for flexible low-cost fabrication. A common feature of early OTFTs was the use of silicon as the substrate material, and thus since these hybrid devices are not truly all-polymer-based they do not offer all the advantages with respect to fabrication. In the world of sensors, the vast majority of previous scientific research and subsequent technological implementation of organic sensors has involved electrochemically grown films exhibiting performance levels that are, in most cases, inadequate for real applications. Solution-processed polymers, on the other hand, offer the greatest potential for the fabrication of low-cost electronics since they can be easily processed as liquids, unlike the organic crystals and short chain oligomers which are typically vapor deposited. Combining these unique material properties with low-cost techniques, such as ink-jet or reel-to-reel printing, offers the ability to rapidly produce disposable printed electronic circuits.
The first all-polymer printed OTFT was reported in 1994. OTFTs are an exciting class of devices within the organic electronics field. The prospect of low cost organic electronic modules incorporating OTFTs fabricated at low temperatures using low energy techniques is very attractive. Low temperature solution-based processes, such as ink-jet printing, allow for compatibility with flexible substrates, upon which it would be impossible to fabricate conventional electronics. In addition, conducting polymers can be synthesized in a laboratory without using rare or expensive materials.
Other Tests Based on the Biosensor Platform
As discussed above, the architecture of the Biosensor Platform allows the recognition element of the biosensor to be exchanged. Accordingly, the GOX element used to detect glucose in the case of the SGB can be substituted with antibodies specific to cancer biomarkers, immunological tests, hormones and other biomarkers. The substitute recognition element will generate an electrical current signal that is detected in a manner identical to the SGB. Given the underlying sensing mechanism is unaltered, we believe the technical risk associated with the development of other tests for biomarkers other than glucose is low.
We have commenced the development of a pilot research and development program with the COE at the University of Newcastle to include tumor markers, immunology and hormones, as indicated in Figure 14 below.
Figure 14: The Biosensor Platform
Following the launch of the SGT, it is intended that the Prostate Specific Antigen test, the Peanut Kernel Allergen test and the Luteinizing Hormone test will launch. The development effort for these biomarkers is presently in the Phase 1 of development as in the diagram in Figure 17 in “—Performance Testing, Current State of Development and Next Steps for the SGB,” which is the definitional stage and encompasses the shortlisting of the best recognition element candidates and identification of the ideal bio-conjugation methods for immobilization on the sensor surface and optimal printing process. In the longer-term, it is contemplated to develop the nucleic acid analytical tests on the Biosensor Platform to be offered as professional point of care tests.
Performance Testing, Current State of Development and Next Steps for the SGB
Preliminary Analytical Performance Testing
The SGB is been designed and developed to meet the ISO 15197:2013 standard and we intend to seek regulatory approval under the specifications of this standard. The parameters assessed during this evaluation are as in Figure 15 below.
Figure 15 : Regulatory approval criteria
The research team at the University of Newcastle, in order to benchmark the performance of the biosensor system, compared it with the partial requirements of the ISO standard ISO 15197:2013 which dictates that at least 95% of results for a given system have to be within +/-15 mg dL-1 at glucose concentrations less than 100 mg dL-1 and within +/-15% at glucose concentrations greater than or equal to 100 mg dL-1.
Precision and system accuracy were assessed by implementing the following standard testing protocol for the measurement of the biosensors.
Artificial saliva was prepared based on the most widely used Fusayama Meyer solution consisting of 11 different glucose concentrations 10, 5, 2, 1, 0.5, 0.2, 0.1, 0.05, 0.02, 0.01 and 0 mM. Then 264 biosensors were tested in groups of 24 replicate devices per concentration and groups of eight devices tested simultaneously.
The objective was to assess the difference between the measured glucose concentration and the actual glucose concentration for each biosensor.
A total of 80.6% of devices fall within the ISO standard bounds depicted by the black lines on the graph in Figure 16 below. We believe the 19.4% deviation is attributable purely to residual inconsistency with device fabrication due to non-standardized automation processes. By standardizing the automation of the biosensor fabrication, quality control and characterization procedures, we believe we will eliminate this deviation. We are preparing the devices to be used for the clinical evaluation in a fully automated environment.
It is important to note that the ISO standard references blood glucose monitors rather than salivary glucose monitors so a direct application of the standard here is not entirely practical.
Figure 16: Test results for precision and system accuracy
Current Stage of Development
The SGB is at advanced stages of development and is expected to achieve market launch within 18 months following this offering. Below is a development chart that highlights the stage of development of the SGB.
Figure 17: Current stage of development
From a regulatory filing and intended use perspective, the SGB is intended to be used as a point of care self-test, indicated for the management of diabetes and non-adjunctive to blood glucose testing for diabetes treatment decisions. Through the regulatory process we intend to demonstrate that the SGB detects trends and tracks patterns aiding in the detection of episodes of hyperglycaemia and hypoglycaemia, facilitating both acute and long-term therapy adjustments.
We anticipate NMPA approval within 15 months of this offering. This accelerated timeline is due to the non-invasive nature of the device and the availability of a prioritized approval process under the NMPA’s Special Approval Procedure of Innovative Medical Devices, which went effective on December 1, 2018 and encourages technical innovation of medical devices and offers an expedited approval process.
We are completing Phase 4 of development as in the diagram above, which is design transfer to manufacturing. We are translating the design into a manufacturable device in preparation of review by the NMPA. More specifically, in this phase we are:
|●||installing production and test equipment, and commencing qualifications;|
|●||establishing component stock levels in preparation for the validation and clinical production builds;|
|●||approving all components from suppliers as ready for use;|
|●||preparing software for final validation; and|
|●||establishing manufacturing capacity as ready to perform first production.|
We also have commenced the protocol for Phase 5, which is validation . We are testing the completed design as a system and assessing if the product developed meets the user requirements established in Phase 1. We will confirm by examination and provision of objective evidence that the particular requirements for a specific intended use can be consistently fulfilled. More specifically, in this phase we:
have completed production and test system validation;
have completed the design validation using pre-defined test protocols and pass/fail criteria;
|●||will perform clinical evaluations; and|
|●||will obtain regulatory approvals.|
In Phase 6, which is release, we anticipate releasing the product through a Controlled Market Release, or “CMR.” All activities conducted during any CMR are aimed at marketing and positioning messages. Production and deployment issues will be monitored, and plans prepared for their resolution or handover. Issues may be handed over to the management team that will take over the ongoing management of the product.
In Phase 7, which is ongoing production, post-market surveillance activities will be undertaken to determine the acceptance of the product in the field and to identify any potential long-term issues that may need to be addressed. Design and process changes will be assessed to determine what development deliverables from previous phases require updating or repeating, i.e. input requirements, verification or validation activities. Phase 7 will last until the product is made obsolete and replaced by a new version as part of our lifecycle management.
The following chart below shows the anticipated development of our products over the 48 months following the completion of this offering.
Figure 18: Anticipated development of products
As mentioned above, it is intended that regulatory approval will be achieved within 15 months of this offering. The successful completion of any clinical testing for the SGB, or other testing that we may be required to undertake in the future, will be subject to:
|●||the conduct of performance testing in accordance with regulatory requirements; and|
|●||performing clinical evaluations on our anticipated schedule and consistent with regulatory standards and protocols.|
We will be responsible for obtaining requisite regulatory approvals in the jurisdictions of the APAC Region, initially engaging the NMPA in China. We do not yet have the necessary regulatory approvals to put to service the SGB or any other product in the APAC Region.
The facilities required for the fabrication of these OTFT devices are all in place at the Australian National Fabrication Facility, which we have used for fabrication and testing. The Australian National Fabrication Facility utilizes state-of-the-art cleanroom Class 1000 (ISO Class 6) standards and fabrication facilities, which are international quality standards. These facilities will be extensively used, and we anticipate they can also be used for initial manufacturing and charged under a cost recovery basis. Furthermore, we are in discussions to manufacture in Hong Kong where we might be eligible for certain financial incentives offered by the Hong Kong Government. For example, the Hong Kong Government established a $2 billion re-industrialization funding scheme to subsidize manufacturers to set up smart production lines in Hong Kong and allocating $2 billion for building manufacturing facilities required by the advanced manufacturing sector in industrial estates.
Inherent in the manufacturing process is a separate calibration process that is batch dependent and ensures analytical performance quality control. Further to this an authenticity validation process verifies that the biosensor is authentic or otherwise flags a device.
Market Penetration and Quality of Life Study
Our market strategy will be to switch users from the current finger-lancing capillary blood test product to our SGT through:
|●||increasing patient compliance;|
|●||building “share of voice” with key opinion leaders and physicians, through the design and administration of a 20,000-person PRO study;|
|●||developing an early stage website to educate and create market awareness while engaging with future users;|
|●||creating “share of voice” for the SGT in the APAC Region;|
|●||creating market awareness among patients through various promotions; and|
|●||partnering with patient diabetes associations and sponsoring patient support groups across the APAC Region.|
Figure 19: Market penetration study
This early strategy is designed for the biosensor to be validated by the physicians and health care professionals through the generation of evidence. We expect that this data will demonstrate that patients will achieve better glycemic control when using the SGT as compared to conventional blood glucose testing.
We intend, assuming the completion of development and regulatory approval, to market and distribute the SGT in the APAC Region. This region consists of:
Adults with diabetes
(20-79) in 1,000s
Adults with diabetes
(20-79) in 1,000s
|China||114,394.80||Papua New Guinea||639.8|
|Federated States of Micronesia||6.1||Republic of Korea||3,465.40|
|Hong Kong||636||Solomon Islands||43|
|Lao People’s Democratic Republic||115.2||Tokelau||0.2|
Figure 20: Full list of countries and territories constituting the APAC Region, with adult diabetic population according to the IDF Diabetes Atlas Eighth Edition 2017
We propose to enter into arrangements with distributors to market and sell the SGB. We have entered into an agreement in principle with a medical affairs commercialization company to drive prelaunch activity with the scope to create awareness and build “share of voice” with local referring physicians, diabetes educators, patient associations, government organizations and general practitioners.
The ideal distributors in the APAC Region will already be geographical market leaders in the self-testing glucose finger prick tests that will market and sell the product across specific regions. Our commercial strategy for distributor selection and appointment includes:
appointment of a global consulting firm to screen the top distributors in each country and the three distributors per province in China ;
|2.||determining selection criteria that include capability, capacity, volume of test strips currently sold and experience in sector;|
|3.||defining the time frame to implement a “switch” strategy for distributors to replace the conventional blood glucose testing devices;|
|4.||appointment of local provincial or regional distributors; and|
|5.||extension of entire Biosensor Platform to distributors by 2024.|
Our strategy will depend in part on finding qualified distributors for the marketing and sale of our products. We will depend on these distributors’ efforts to market our products. These distributors typically would sell a variety of other, non-competing products and will be expected to devote certain resources to selling the SGB. We expect to devote suitable time and effort to recruiting and retaining qualified third-party distributors and training them in our technology and product offering. We plan to adopt a multiple channel strategy to balance the marketing and sales efforts. Beyond the distribution strategy, there will also be activities in:
|1.||online and offline sales and marketing;|
|2.||offline medico-marketing activities to include conferences, diabetes association support, promotion and demand creation in hospitals; and|
|3.||compliant E-commerce platform to act as the main distribution channel; and|
|4.||partnerships with distributors, chain pharmacies, local device platforms and insurers.|
Deployment of Middleware and Digital Information System
We expect that our technology will make it easier for a patient to monitor their glucose levels. Accordingly, we anticipate having the potential to collect a greater amount of clinical data from a larger population of patients. This creates the potential to provide significant epidemiologic insights into the disease.
The SGB and our digital information system constitute our healthcare ecosystem, and this becomes a powerful disease management tool to address many of the systemic issues inherent in diabetes management in the APAC Region through:
|●||the storage and analysis of patient data generated by the SGB;|
|●||the dietary and fitness inputs generated by the biosensor app and the output to the user;|
|●||the connectivity of patients and patient results with health care team or relatives (as per patient requirements);|
|●||reminders and flagging service for patients;|
|●||a medium for pharmaceutical companies to implement patient support programs (as per regulatory restrictions); and|
|●||education services for lifestyle, diet and glucose management.|
Beyond the patient, all types of key stakeholders within the health ecosystem have unmet needs which brings digital opportunities to shape the way patients manage the disease enabling further integrations. Our digital information system is being designed to specifications that allow it to connect the patients’ healthcare ecosystem, protecting its privacy at all times, leveraging the software app and cloud as a bridge between patient and health care providers, integrating software with hardware, integrating payors and providers.
Hurdles to Product Launch
There are numerous hurdles required before product launch will be possible, as to which there can be no assurances. Those hurdles include, but are not limited to, the following (which are not necessarily set forth in chronological order):
|●||Regulatory Approvals. The research, design, testing, manufacturing, labeling, selling, marketing and distribution of medical devices are subject to extensive regulation by country-specific regulatory authorities, which regulations differ from country to country. We have not yet obtained any regulatory approvals in any jurisdiction. We must obtain all regulatory approvals as will permit the product launch of the SGT as well as any eligible protection of any intellectual property.|
Clinical Studies. Although we completed performance testing of the biosensor as described in “—Preliminary Analytical Performance Testing,” to date we have conducted limited trials on the SGB. Further studies and trials will be required prior to and in connection with obtaining all regulatory approvals. These studies and trials will have to be successfully completed to obtain approvals in order to market the SGB.
|●||Manufacture and Supply. We currently have fabrication facilities in place at the Australian National Fabrication Facility and are in discussions with various potential parties for sourcing manufacture to scale facilities across the APAC Region.|
|●||Marketing. We are looking for and will depend in part on qualified distributors for the marketing and selling of our products. We will depend on these distributors’ efforts to market our products, yet we will be unable to control their efforts completely. We have not yet executed any distribution agreements in this regard.|
|●||Software. We must conduct software development work to make the biosensor software compatible with existing and potential future smart device platforms. This software work remains to be done.|
|●||Personnel. In order to commercialize our SGT, we will need to attract and retain highly skilled managerial, sales, scientific and technical personnel to advance the product beyond its current development stage.|
|●||Intellectual Property. While the SGB is patent protected in the United States and China we must remain vigilant to ensure that protection is realized. We will need to assess the eligibility of our intellectual property in the wider jurisdictions of the APAC Region and if possible implement measures to achieve that protection.|
Experts. To facilitate completion of the foregoing steps and through a request for proposal global tendering process, we are in the process of engaging consultants, advisors and other experts, including in particular regulatory experts who we have already engaged.
Additional Capital. Although we believe that after this offering we will have sufficient capital resources to enable us to continue to implement our business plan and remain in operation for at least the 30 months, we may require additional capital earlier than anticipated. See “Use of Proceeds” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
The Glucose Monitoring Industry
The Self-Monitoring of Blood Glucose
Self-Monitoring of blood glucose is the main approach for glucose monitoring and has been used for over 40 years. Currently, self-monitoring of blood glucose is conducted periodically by the patient using a blood glucose measuring device. Blood glucometers require pricking a finger with a lancet and applying a drop of blood on the test strip. The test strip is then inserted into the device which provides a reading of glucose level in blood. Test strips are supplied by the glucometer manufacturer and are generally device-specific, although generic test strips are also available.
Figure 21: Invasive finger pricking for self-measurement of blood glucose
There are more than 100 types of blood glucometers currently are commercially available and they differentiate based on size and weight, cost, data storage capacity, test accuracy, blood sample size and screen visibility (users with poor eyesight may prefer larger screens). Some glucometers also include high-tech features such as:
|●||Bluetooth. Some meters have Bluetooth capabilities, allowing data to be transmitted to a smartphone, tablet or computer.|
|●||USB Port: Many meters allow users to download data to a computer with a USB cable. Some meters plug directly into a computer’s USB port.|
These systems, however, still have shortcomings. In addition to the referenced strain on patients, a recent study of commercial blood glucose sensors has shown that of the 34 systems completely assessed, seven systems did not fulfill the minimal accuracy requirements of the ISO standard.
Continuous Glucose Monitoring
Continuous glucose monitoring is not an alternative to finger prick self-monitoring of blood glucose. Only one system to date has been deemed of equivalent use “as an aid to monitor the effectiveness of diabetes control” or non-adjunctive use. The procedure is invasive and involves the insertion of a glucose biosensor into the subcutaneous tissue layer or the hypodermis. The biosensor, which measures glucose levels in interstitial fluid, is attached to a transmitter that sends signals to either an insulin pump or a portable meter. These devices are generally worn for about one week and require regular calibration through conventional blood glucose detection, about twice a day. While the accuracy of these devices has been an issue, it has improved in recent years. Continuous glucose monitoring can track a patients’ glucose throughout the day and night, notifying the patient of highs and lows so the person can act.
Subcutaneous glucose levels change more slowly than plasma glucose, which can be a restriction to their effectiveness, particularly if glucose levels are changing rapidly. Subcutaneous glucose levels have a time lag compared to blood glucose measurements, and measurements may not always match blood glucose.
Continuous glucose monitoring is commonly used in conjunction with continuous subcutaneous insulin infusion, or “CSII,” which involves a patient wearing an insulin pump and infusion set that infuses insulin into the body. Although pumps are currently manually controlled by the patient, continuous glucose monitoring combined with CSII could potentially be used as part of a closed-loop. CSII is generally restricted to Type 1 diabetics, where the need for ongoing insulin infusion is highest.
Continuous glucose monitoring is mainly used in a limited proportion of diabetics, particularly those concerned about severe, nocturnal hypoglycemia, pregnant women who require meticulous glucose control or those who may not be able to easily administer a self-monitoring test (e.g., those living in remote or hostile environments). However, continuous glucose monitoring is more expensive than traditional self-monitoring of blood glucose and in many cases is not eligible for reimbursement.
Developments in Glucose Monitoring
We believe that there are a limited number of companies developing alternatives to blood-based glucose monitoring. In addition, we believe that a number of universities across the world have a range of saliva-based sensors at very early stages of development.
Emerging approaches to non-invasive glucose monitoring, none of which have reached widespread application, include the following:
|●||Optical Transducers. Optical transducers can potentially detect glucose in blood using light of variable frequencies. Different properties of light are used to interact with glucose molecules. The anterior chamber of the eye and the interstitial fluid are two regions where spectroscopic measurement of the reflected or transmitted light can be captured. Some emerging techniques in optical transducers include Kromoscopy, Photoacoustic spectroscopy, OCT, Occlusion spectroscopy, Polarimetry, Thermal infrared, Fluorescence, Raman spectroscopy, MIR spectroscopy, and NIR spectroscopy. Most of these systems are not suitable for point of care testing.|
|●||Transdermal Transducers. Transdermal transducers can be used to measure glucose. In this case, oxygen supply is not a limiting factor and hence the concentration of glucose can potentially be detected with less interference. Some techniques, such as reverse iontophoresis, demonstrate adequate precision for home-based blood glucose monitoring. The shortcoming of such transducer types is their inability to detect hypoglycemia with a sensitivity of 23% for glucose concentrations. Emerging techniques in transdermal transducers include impedance spectroscopy, skin suction blister, sonophoresis and reverse iontophoresis.|
|●||Use of Wearable Technologies for Diabetes Management. Several companies are developing wearable devices that are purported to be capable of monitoring glucose and tracking biometrics to monitor health. These devices commonly use the speckle pattern effect, i.e., using changing patterns of scattered light. Some wearable devices also use non-invasive spectrometric process combined with electrical sampling to determine glucose levels in blood using low-cost wavelength specific transmitters and receivers.|
Further technologies in development, and their limitations and impediments, include:
|●||Lasers: There are safety concerns with long-term use of lasers on the skin and concerns with lag time between glucose levels in the skin and blood glucose levels.|
|●||Breath-Based Measurements: There are concerns that measuring breath does not accurately correlate with blood glucose levels. In addition, there is the potential for contamination. The technology is not suitable for young children.|
|●||Tear Sample: There are concerns with lag time between glucose levels in tears and blood glucose levels. Measurements may be affected by the patient’s hydration.|
|●||Wearable Technology: There are concerns about the reliability of results due to problems with sweat and body temperature, the usability during sporting activities, particularly water sports. There are also problems with skin irritation. The technology is not suitable or practical for children.|
|●||Ear Lobe or Canal Sensors: The devices are indiscreet and impractical. There are problems with ear wax and reliability of the measurements, especially in children.|
Importance of Glucose Monitoring
One of the main aims of diabetes monitoring and management is to maintain blood glucose levels within a specified target range. Self-monitoring of blood glucose should be part of a regular management plan for patients with diabetes to enable this. Self-monitoring provides information regarding an individual’s dynamic blood glucose profile. This information can help with the appropriate scheduling of food, activity, and medication. It is also required for understanding of the timing of blood glucose variations. Lack of regular self-monitoring predicts hospitalization for diabetes-related complications.
Self-monitoring of blood glucose is an essential tool for people with diabetes who are taking insulin or for those who experience fluctuations in their blood glucose levels, especially hypoglycemia. For patients taking insulin and adjusting their dose, self-monitoring is needed for self-management. For others receiving oral medication, profiling glucose trends and the confirmation of high or low blood glucose can be a useful addendum to successful management.
Self-monitoring of blood glucose aids the management of diabetes by:
|●||facilitating the development of an individualized blood glucose profile, which can then guide health care professionals in treatment planning for an individualized diabetic regimen;|
|●||giving people with diabetes and their families the ability to make appropriate day-to-day treatment choices in diet and physical activity as well as administration of insulin or other agents;|
|●||improving patients’ recognition of hypoglycemia or severe hyperglycemia; and|
|●||enhancing patient education and patient empowerment regarding the effects of lifestyle and pharmaceutical intervention on glycemic control.|
The role of blood glucose control in preventing the development and progression of complications has been proven in both type 1 and type 2 diabetes, with an especially strong relationship between intensive blood glucose control and complications such as neuropathy (affecting limbs) and diabetic retinopathy (leading to blindness).
Over time, glucose measurements are expected to provide the patient and their health care professionals with the information and insights required to determine the best management strategy for diabetes, potentially minimizing the fluctuations in their glucose levels and resulting in better health outcomes.
The role of blood glucose monitoring and control in preventing the development and progression of diabetes complications has been well established. Studies show that those who properly monitored blood glucose levels had better health outcomes (such as reduced complications of diabetes) compared to those who did not.
For a person with diabetes, however, this daily process is not only painful but can be exhausting, disruptive, frustrating, frightening and consuming, which often leads to poor compliance and poor health outcomes. People with diabetes have reported that stigma is a significant concern to them. This causes tension and anxiety and, because the procedure is perceived as inconvenient and difficult, leads to suboptimal monitoring and poor adherence. Many people with diabetes do not test as often as clinically recommended, increasing the risk of complications. The reasons for under-compliant testing include, but are not limited to:
|●||Inconvenience. Patients with single-point finger stick devices must use them several times a day. The patient self-inflicts a painful prick and draws blood to measure blood glucose levels. This process is inconvenient and is often uncomfortable and embarrassing in social situations.|
|●||Pain. Although the fingertip provides a good site to obtain a blood sample, it also is densely populated with highly sensitive nerve endings. As a result, lancing and subsequent manipulation of the finger to draw blood and multiple finger sticks can be painful.|
|●||Risk of Infection. Breaking the skin and creating a wound may expose a patient to infection.|
|●||Difficulty of Use. To obtain a blood sample with single-point finger stick devices, patients generally prick one of their fingertips and squeeze the area to produce the blood sample, with another prick required if insufficient blood volume is first obtained. The blood sample is then placed on a disposable test strip that is inserted into a blood glucose meter. This task can be difficult for patients who have decreased sense of touch and/or clarity of vision, which is not be uncommon for diabetics.|
|●||Medical Waste. Used needles, lancets and blood strips are medical waste that must be disposed of accordingly.|
Types of Diabetes
Diabetes is the condition in which the body does not properly process food for use as energy. Most of the food we eat is turned into glucose, or sugar, for our bodies to use for energy. The pancreas, an organ that lies near the stomach, secretes a hormone called insulin to help glucose get into the cells of our bodies. When a person has diabetes, the body either does not make enough insulin or cannot use its own insulin as well as it should. This causes sugars to build up in blood. Diabetes can cause serious health complications including heart disease, blindness, kidney failure, and lower-extremity amputations. Self-monitoring of blood glucose is an important component of modern therapy for diabetes and is recommended for people with diabetes by their health care professionals in order to achieve normal levels of glycemia. The types of diabetes are as follows:
Type 1 Diabetes
Type 1 diabetes is caused by an auto-immune reaction where the body’s defense system attacks the insulin-producing cells located in a person’s pancreas. The reason why this occurs is not fully understood. People with Type 1 diabetes produce no insulin. The disease can affect people of any age, but usually occurs in children or young adults. People with this form of diabetes need injections or infusions of insulin every day to control the levels of glucose in their blood. Type 1 diabetes patients constitute approximately 10% of the overall number of patients but are much more extensive users of glucose monitoring systems, as these people with diabetes need to measure their glucose levels over 6 times a day.
When a person has lived with diabetes for many years, a condition known as “Hypoglycemia Unawareness” can occur, affecting approximately 40% of people with Type 1 diabetes. As a result, people with this condition monitor their glucose levels more frequently. It is a major limitation to achieving tight diabetes control and significantly reduces quality of life.
Type 2 Diabetes
Type 2 diabetes accounts for at least 90% of all cases of diabetes. It is characterized by insulin resistance and relative insulin deficiency, either of which may be present at the time that diabetes becomes clinically manifest. The diagnosis of Type 2 diabetes usually occurs after the age of 40 but can occur earlier, especially in populations with high diabetes incidence. Type 2 diabetes can remain undetected for many years and the diagnosis is often made from associated complications or incidentally through an abnormal blood or urine glucose test. It is often, but not always, associated with obesity, which may contribute to insulin resistance and lead to elevated glucose levels. As Type 2 diabetes is a progressive disease, a growing portion of Type 2 diabetes patients use insulin as part of their treatment. Trends such as urbanization, unhealthy diets and reduced physical activity are all contributing lifestyle factors that increase the risk of developing Type 2 diabetes.
Gestational diabetes is a form of diabetes consisting of high glucose levels during pregnancy. It develops in one in seven pregnancies worldwide and is associated with complications in the period immediately before and after birth. Gestational diabetes usually disappears after pregnancy, but afflicted women and their offspring are at an increased risk of developing Type 2 diabetes later in life. Approximately half of women with a history of gestational diabetes go on to develop Type 2 diabetes within five to ten years after delivery.
We believe that the SGT also will be able to support patients with pre-diabetes, also called metabolic syndrome. Metabolic syndrome is a combination of medical disorders that increase the risk of developing cardiovascular disease and diabetes. For example, approximately 493 million people in China are understood to have pre-diabetes. This population is typically prescribed with periodic lab-based glucose level testing which requires a doctor visit and typically does not involve the utilization of self-monitoring glucose devices.
An Epidemic Globally and Across the APAC Region
Diabetes is a global epidemic and the disease is growing rapidly. Some key statistics include:
Figure 22 : Key statistics of diabetes
Diabetes Across the APAC Region
APAC has the world’s largest diabetes population, and it continues to grow at a fearsome pace. Rapidly rising rates of diabetes have been seen in previous studies, and according to the latest data, the APAC Region has more than 164 million people living with diabetes, representing 38% of the world’s total people with diabetes.
Figure 23: Diabetes Across the APAC Region
A Snapshot of Diabetes in the Main Countries and Territories Across the APAC Region
Diabetes is one of the biggest challenges facing Australia’s health system today. According to Inkwood Research, 280 Australians develop diabetes every day. Around 1.7 million Australians have diabetes. This includes all types of diagnosed diabetes (1.1 million known and registered) as well as silent, undiagnosed type 2 diabetes (up to 500,000 estimated). Australia is ranked 7th highest in the world for prevalence of type 1 diabetes in children aged 0 to 14 years.
According to the Baker IDI Heard & Diabetes Institute, the total annual cost for Australians with type 2 diabetes is up to AUS$6 billion including healthcare costs, the cost of carers and government subsidies. The average annual healthcare cost per person with diabetes is AUS$4,025 if there are no associated complications. However, this can rise to as much as AUS$9,645 in people with complications. For type 1 diabetes, the total annual cost in Australia is AUS$570 million, with the total average annual cost per person being AUS$4,669. The average total annual cost is AUS$3,468 for people without complications; however, this can rise to AUS$16,698 for people with complications.
Diabetes is the largest and fastest growing health issue in New Zealand. According to the IDF Diabetes Atlas, there are over 330,000 people in New Zealand who have been diagnosed with diabetes (mostly type 2). It is thought there are another 100,000 people who are unaware that they have type 2 diabetes. Diabetes is most common among Māori and Pacific Islanders, who are three times as likely to develop diabetes as other New Zealanders.
There are 7.2 million people in Japan who suffer from diabetes. The country spent $16.68 billion on diabetes healthcare in 2017, which was the fifth highest expenditure in the world that year (ages 20 to 79 years).
The number of medical consultations in Japan is considerable, especially for patients with diabetes. According to the Organization for Economic Co-operation and Development, or “OECD,” health statistics, on average Japanese individuals have a clinical consultation 12.9 times in a single year, versus the OECD average of 6.6 in 2013. With regard to diabetic care, patients on average have a consultation every 33.7 days whereas guidelines across many countries recommend that patients be followed up every three months.
The average cost per patient for diabetes related care is nearly $3,800 a year, mostly covered by national health insurance. However, due to the serious aging issue in Japan, the shortage of labor has already become a significant problem, especially in the healthcare sector, and it’s being exacerbated by the steady decrease in the overall population. Today, roughly 28% of the population is over the age of 65. By 2040, the Japanese Ministry of Health expects this to reach 35%. This not only means more elderly people in society but dramatically fewer people to take care of them.
With a population of over 264 million, Indonesia is the world’s fourth most populated country. Despite relatively low prevalence rate (4.8% including both type 1 and 2 in individuals aged between 20-79), the country is the seventh largest market with 10.3 million diabetic patients in 2017 and expected to grow to 16.7 million by 2045 according the IDF Diabetes Atlas.
Malaysia has 3.4 million people with known diabetes, a prevalence rate of 16.9% which is the highest in Asia. The increasing prevalence of overweight and obese population has contributed to the rise.
The incidence of diabetes in Malaysia has exceeded all previous projections made by the International Diabetes Federation and World Health Organization. From 1996 through to 2011 the rate of growth in the number of patients with diabetes was 80% over the period according to the Ministry of Health Malaysia. If this rate remains unabated by 2020 when Malaysia attains a developed nation status, it is predicted that more than a third of adults above the age of 30 would have developed the disease.
The prevalence of diabetes in Singapore (10.5% of total population) is higher than the world’s average (8.8% of total population) according to the Ministry of Health, Singapore. The Ministry of Health believes that about a third of diabetics are not aware of their condition.
About 1,200 diabetics undergo amputations every year in Singapore, this is the highest rate of lower limb amputation in the world due to diabetes.
More than 3.4 million South Korean adults have diabetes. In addition, nearly a quarter of South Korean adults had prediabetes according to a 2016 report by the Korean Diabetes Association.
Diabetes awareness is a key challenge in South Korea, as 3 out of 10 people with diabetes are not aware of their condition, and 2 of 5 people with diabetes (diagnosed and undiagnosed) are not taking any treatment for their condition, according to the 2016 report. Only 9.4% of individuals with diabetes have a comprehensive management to monitor and manage their conditions.
The economic growth of China has driven lifestyle changes in the Chinese population that have had a major impact on the increased incidence of the disease. China accounts for the fastest growing global market segment. China has, by a significant number, the largest number of people with diabetes. In 2017, according to the IDF Diabetes Atlas, China alone had a similar number of people with diabetes as the next three largest diabetes markets combined (India, United States and Brazil). China had 1.3 million deaths due to diabetes in 2015 (26% of total global deaths due to diabetes), with 40.8% of those deaths occurring in people under 60. Diabetes related health expenditure in China was $51 billion in 2015 alone and is expected to reach $72 billion by 2040.
The Journal of the American Medical Association identified that out of 99,000 people surveyed in a study, half had pre-diabetes blood glucose levels – abnormally high but not high enough for a diagnosis of diabetes. Approximately 493 million people in China are understood to have pre-diabetes. These findings indicate the enormity of diabetes as a public health problem in China.
A significant portion of the direct costs of diabetes, and its broader economic impact, arises due to associated complications such as heart disease, kidney disease, amputations, cerebral conditions and blindness – over 70% of patients have at least one complication. A recent study using actual electronic insurance claims data (from 2009-2011) in China found that the average direct cost of treatment ($1,857 per patient) increased significantly with the number of diabetes-related complications up to over $3,000. The average annual cost per patient with at least one hospitalization (about 20% of patients) in a year ($6,301 in 2009) was more than four-fold the costs per patient with only outpatient visits.
The Digital Healthcare Industry
Across the APAC Region, many countries and territories are experiencing an aging population combined with healthcare infrastructures that have struggled to keep up with the pace of socioeconomic change. This creates significant opportunity to enhance efficiency through digital innovation.
For example, according to the Boston Consulting Group, China’s digital healthcare market is expected to grow considerably in the next few years, with $110 billion expected to be invested in 2020, of which $35 billion is expected to be invested in disease management.
The broad scope of digital health includes categories such as mobile health (mHealth), health information technology, wearable devices, telehealth and telemedicine, and personalized healthcare. Providers and other stakeholders are using digital health in their efforts to:
|●||increase quality; and|
|●||make medicine more personalized for patients.|
It is widely believed that patients and consumers can use digital health to better manage and track their health and wellness related activities.
This growth in digital healthcare is expected to be driven in large part by solutions to address current inefficiencies and unmet needs in the APAC Region healthcare systems for diabetes sufferers. The promise of digital health – also termed “connected health” – in this context is to:
|●||allow for remote diagnosis and monitoring;|
|●||facilitate self-managed care;|
|●||deliver care outside traditional settings, with better access at lower cost; and|
|●||assist chronic disease management to improve population health outcomes.|
We believe that the opportunity to unlock substantial savings across the APAC Region’s healthcare value chain is significant. Recently, there appears to have been a significant increase in the use of digital healthcare resources across the APAC Region, such as online patient-doctor communication and consulting services, disease management applications, social networks for medical professionals, and even “internet hospitals” that provide remote diagnostics.
Technology License Agreement
On September 12, 2019, we entered into an Amended and Restated Technology License Agreement (referred to as the “License Agreement”) with the Licensor, which was approved by our independent directors. The Licensor currently owns 99.1% of our outstanding common stock and will continue to own a majority of our outstanding common stock immediately after this offering.
The License Agreement sets forth our contractual rights and responsibilities relating to the Licensed Products in the APAC Region. The “Licensed Products” are products consisting of a biosensor strip and smart device application or dedicated reader device that use the biosensor technology owned by the Licensor relating to measuring, or otherwise determining, the amount or concentration of glucose, and the existence of biological markers of cancer, allergy/immunology and hormones, in a bodily fluid. The Licensed Products only include products that are supplied by an Authorized Supplier. An “Authorized Supplier” includes us, the Licensor, any of our affiliates or any affiliates of the Licensor, or any third party manufacturer and/or reseller that the Licensor has expressly identified or approved in advance in writing for the purpose of quality control for the supply of Licensed Products to us. We do not currently intend to manufacture the Licensed Products in-house. As we believe it is common practice in our industry, we intend to outsource manufacturing to an unrelated third party. Outsourced manufacturing has commenced at the Australian National Fabrication Facility, which has Class 1000, ISO Class 6 cleanroom facilities and has been approved by the Licensor. We intend to continue to use this facility to manufacture the SGB batches to be used for regulatory evaluation.
|●||The Licensor granted to us an exclusive license to the Licensor’s proprietary rights to the biosensor technology used in the Licensed Products, solely in the APAC Region and solely to:|
|o||act as the authorized party for the purpose of prosecuting the application of, and obtaining any, regulatory approval for the Licensed Product, including being authorized to prosecute the approval for an investigational device required for the purpose of carrying out clinical studies;|
|o||manufacture, promote, market, import, offer, sell and distribute the Licensed Products;|
|o||provide reasonable customer support services on the use of the Licensed Products to end users of, and health care practitioners referring end users to, the Licensed Products;|
|o||use the Licensed Products only for the purposes identified and permitted pursuant to regulatory approval; and|
|o||collect data acquired from the Licensed Products.|
The geographic scope limitation for the exclusive license was the result of negotiation between us and the Licensor. We believe that the Licensor sought a limited geographic scope in order to facilitate commercialization of the biosensor technology by minimizing the required financing and regulatory hurdles to launch the Licensed Products. However, we also believe the APAC Region is the most suitable region for the distribution model we plan to implement for the reasons discussed in “Business—Diabetes—An Epidemic Globally and Across the APAC Region .” As of the date of this prospectus, we have been informed by the Licensor that it has not granted other licenses with different or overlapping scopes, although it may grant licenses covering other geographic areas in the future.
The license is non-transferable, non-assignable and non-sub-licensable, except that the Licensor will in good faith consider any request by us for any sub-license. We may not exploit or seek to exploit any rights in respect of the Licensed Product outside of the APAC Region through any means, including digitally or online where the end user is not physically resident in the APAC Region. We must do all things necessary in turn to ensure that any distributors of Licensed Products in the APAC Region do not exploit or seek to exploit any rights in respect of the Licensed Product outside of the distributor’s territorial boundary.
|●||The Licensor may require any change to any Licensed Product by any Authorized Supplier and may make any change to any sales or promotional literature made available by the Licensor, provided that such changes do not affect any regulatory approvals obtained by us.|
|●||We must (i) manufacture, promote, market, import, offer, sell, distribute and supply the Licensed Products in accordance with certain distribution requirements set forth in the License Agreement, including delivering licensed products without inclusion of any other product, only as supplied by an Authorized Supplier; (ii) monitor and exercise all reasonable vigilance and meet all regulatory requirements in respect of quality control, sample control, distribution quality and control and any adverse events in respect of the Licensed Products; and (iii) file for, prosecute the application for, and obtain a marketing approval for each of the Licensed Products and all legal permits necessary for promoting, marketing, offering or selling each Licensed Product.|
Commencing after the receipt of regulatory approval in a jurisdiction, we will pay the Licensor a Minimum Royalty with respect to such jurisdiction for each year, in four equal quarterly installments. The Minimum Royalty will be 13% of the projected net sales in such jurisdiction for each such year. The projected net sales will be an amount mutually agreed between us and the Licensor for the first such year. For each ensuing year after the first year, the projected net sales will be the number of Licensed Products sold in the prior year, as adjusted for the expected market growth and, for each year through the tenth year, as increased by up to an additional 7%. In the event of a dispute between us and the Licensor regarding the determination of the expected market growth or the additional growth percentage, the License Agreement provides for resolution by an independent third party. At the end of each quarter, if the quarterly installment of the Minimum Royalty is less than the Actual Royalty (equal to 13% of the actual net sales of Licensed Products for such quarter) in such jurisdiction, we will pay Licensor the difference between the quarterly installment of the Minimum Royalty and the Actual Royalty. The royalty fee rate will be reduced from 13% to 3% upon the expiration of the patent portfolio covered by the License Agreement.
|●||We will promptly upon adding an individual as a new end user, obtain and record as much of the anonymized demographic information of such end user as may be lawfully and reasonably collected; continuously cause all data acquired from the Licensed Products to be automatically transmitted in real time, anonymously; and retain all of the anonymized demographic information and any data acquired from the Licensed Product in a single anonymized database. We will, on behalf of the Licensor, establish and continuously maintain the database containing this anonymized information. While the anonymized data will be owned by the Licensor, we will own during the term of the License Agreement the personally identifiable data, including health data, collected by us. In addition, the Licensor will provide us with certain of the data acquired from the Licensed Products.|
The demographic information and personally identifiable information will be used, following patient consent, as a disease management tool to offer patients value-added services, i.e., personalized education services for lifestyle, diet and glucose management. These services will be in accordance with the applicable local medical codes and regulatory environment. The use of such consensual information will be in accordance with privacy laws of the relevant countries and territories in the APAC Region.
|●||As between us and the Licensor, the Licensor solely owns all right title and interest to, among other items of intellectual property, the biosensor technology (including any improvements we make to the biosensor technology), the anonymized demographic information and data acquired from the Licensed Products and any other technology of the Licensor, and all derivations based on, and all proprietary rights in, the foregoing. The Licensor will have the right to decide whether to protect or enforce, and the right to control any action relating to the protection and enforcement of, any of the foregoing intellectual property or proprietary rights. However, if the Licensor does not protect or enforce the foregoing intellectual property or proprietary rights, we will have the right to do so in the APAC Region at our own cost and expense.|
|●||The parties generally agree to keep confidential, subject to customary exceptions, all confidential information of the other party.|
|●||The parties made certain customary representations and warranties and agreed to certain customary limitations of liability. Except with respect to the Licensor’s ownership of the intellectual property rights in the licensed property and the non-infringement by our exercise of those rights, the Licensor provided no, and disclaimed all, representations, warranties or covenants relating to the licensed intellectual property or any other matters under the License Agreement and in particular disclaims any fitness of the property for any purpose.|
|●||The parties undertook certain indemnity obligations:|
|o||We agreed to indemnify the Licensor and its agents and affiliates for any claims related to: (i) any manufacturing (to the extent that we are an Authorized Supplier or in control of an Authorized Supplier), promotion, marketing, import, representation, offer, sale, resale, distribution, or supply of any Licensed Product or any commercial unit or violation of the License Agreement, (ii) any activities of performance of, or any claims by, or any non-conformance or conduct of, any of our personnel, (iii) any collection, storage, processing, transmission, disclosure including unauthorized disclosure, or use of any of the data collected, including any data or security breach, or interference with any database, or any failure to comply with any provision of the License Agreement or any applicable law related to any data or information including, without limitation, any failure to obtain all required consents and approvals for collection, storage, processing, transmission, disclosure, and use of any data as provided or contemplated under this Agreement, (iv) any direct or indirect infringement or violation of any proprietary rights of any third party resulting from, in connection with, or related to any of our activities or the activities of our personnel, and/or (v) any negligence or willful misconduct or violation of any applicable law by us or any of personnel (regardless of any contributory or comparative negligence of any indemnified party, but not for any damages to the extent resulting from such contributory or comparative negligence of any indemnified party).|
|o||The Licensor agreed to indemnify us and our agents and affiliates from any claims related to : (i) any third party claim that the exercise by us of our rights under the License Agreement in respect of the Licensed Product is in violation of their property or rights, and (ii) any Licensed Product regulatory or quality recall or any consumer or user claims or liability in relation to Licensed Product (regardless of any contributory or comparative negligence of any indemnified party, but not for any damages to the extent resulting from such contributory or comparative negligence of any indemnified party).|
|●||There is no set expiration date for the License Agreement. However, the exclusivity of the license granted under the License Agreement runs until the expiration of the patent portfolio covered by the License Agreement, which is currently until 2033. We expect that the patent portfolio will be extended as new patents are created throughout product development, thereby extending the term of the License Agreement. For instance, we expect to seek additional patents in connection with the development of the Prostate Specific Antigen test, the Peanut Kernel Allergen test and the Luteinizing Hormone test.|
|o||The License Agreement may be terminated by us in the event of a material breach by the Licensor, if the Licensor does not cure the breach within 30 days after receiving notice of the breach; or in the event the Licensor discontinues its business operations or in the case of certain events related to insolvency or bankruptcy. The License Agreement also may be terminated by us after July 3, 2029 upon 180 days’ prior written notice.|
|o||The License Agreement may not be terminated by the Licensor unless we permanently discontinue our business operations in relation to the Licensed Products, or if we dissolve or cease to exist.|
|After the expiration of the exclusivity period under the License Agreement, we may continue to market and sell the Licensed Products. We believe the non-invasive nature of our product will establish us as a significant participant in the glucose testing market in the APAC Region. Therefore, by the time the patents expire, and by the time the exclusivity period under the License Agreement expires, we expect to hold a meaningful share in the market, and brand awareness that will ensure we continue to operate successfully. No assurance can be given that there will not be significant direct competition in the APAC Region following the expiration of patent protection.|
In the event that the Licensor develops intellectual property using a printable organic thin film transistor for the detection or measurement of indicators other than glucose, and the existence of biological markers of cancer, allergy/ immunology and hormones, and is seeking to license the use of the new indicator intellectual property in the APAC Region the Licensor must notify us in writing of the terms of the proposed new license. We will have thirty days from the date of provision by the Licensor of a license agreement in relation to the new indicator intellectual property to exercise our right to enter into the license agreement. The Licensor may not enter into a license agreement with another party for the new indicator intellectual property cover the APAC Region, unless the economic terms of such license are no more favorable to such party than the economic terms of the last license agreement offered to us.
The preceding summary and all other references to the License Agreement in this prospectus is qualified by reference to the complete text of the License Agreement, which are filed as exhibits to the registration statement of which this prospectus is a part. You are encouraged to read the License Agreement in its entirety. See “Risk Factors.”
Our business depends on the proprietary biosensor technologies licensed by us from the Licensor. The Licensor has secured and continues to pursue intellectual property rights related to this technology in China, the United States and other countries. LBSD has developed a patent portfolio that includes the following patents:
The original patent application, which claims a priority date of March 2012, has been granted in the United States (9,766,199) and China (ZL201380022888). A second international patent application (PCT/AU2016/050555) claiming iterations to the device design has been filed with a priority date of June 2016 and will soon enter national phase in certain jurisdictions, and further patent applications are in preparation. The patents protect the following technological claims of the SGB: the architecture of a biofunctional organic thin film transistor device comprising a gate electrode, a dielectric layer, a partially-organic semiconducting layer, a source electrode, a drain electrode, a substrate and an enzyme; the method for producing the organic thin film transistor device; and the method for determining the concentration of a compound in a sample by interpreting the amperometric signals generated by the device. The Chinese and the United States patent belong to the same patent family, originating from the Australian patent. As such, all of the patents relate to identical technology claims.
We believe that the Licensor intends to aggressively prosecute these patent applications and file further applications, as appropriate, to protect the proprietary biosensor technologies, including improvements thereon, in the United States as well as in the APAC Region, and to take any necessary action to maintain and enforce its patent and other intellectual property rights. There can be no assurance, however, that the Licensor will take such actions, and under the License Agreement, we have no right to compel them to do so. If the Licensor elects not to protect or enforce its intellectual property rights, we would be permitted take action to protect or enforce these rights in the APAC Region, but any such action would be at our cost and expense.
We intend to vigorously protect our intellectual property rights in any technologies owned by us through patents and copyrights, as available through registration in the United States and internationally. We also will rely upon trade secrets, know-how, and continuing technological innovation to develop and maintain our competitive position. We intend to protect any of our proprietary rights through a variety of methods, including confidentiality agreements and/or proprietary information agreements with suppliers, employees, consultants, independent contractors and others entities who may have access to proprietary information. We will generally require employees to assign patents and other intellectual property to us as a condition of employment with us. All of our consulting agreements will pre-emptively assign to us all new and improved intellectual property that arise during the term of the agreement. In addition, we may license additional technologies from the Licensor or third parties. Prior to any further acquisition or licensing of technology from a third party, we will evaluate the existing proprietary rights, our ability to obtain and protect these rights, and the likelihood or possibility of infringement upon competing rights of others.
The issuance of a patent does not ensure that it is valid or enforceable. The term of individual patents depends upon the legal term of the patents in the countries in which they are obtained. In most countries in which we file, the patent term is 20 years from the earliest date of filing a non-provisional patent application. In the United States, a patent’s term may be shortened if a patent is terminally disclaimed over another patent or as a result of delays in patent prosecution by the patentee, and a patent’s term may be lengthened by patent term adjustment, which compensates a patentee for administrative delays by the United States Patent and Trademark Office in granting a patent.
We conduct our business using the licensed trademark “Glucose Biosensor” and our logo, as well as domain names incorporating either or both of these trademarks. Our trademarks are not registered. We own the domain name glucosebiosensor.com.
The medical device industry is highly competitive, subject to rapid change and significantly affected by new product introductions and other activities of industry participants. We face potential competition from major medical device companies worldwide, many of which have longer, more established operating histories, and significantly greater financial, technical, marketing, sales, distribution, and other resources. Our overall competitive position is dependent upon a number of factors, including product performance and reliability, connectivity, manufacturing cost, and customer support.
The glucose monitoring industry currently is dominated by blood glucometers that require pricking a finger with a lancet and applying a drop of blood on a test strip. Our major competitors for glucose testing solutions include Bayer, Abbott, and Roche. If approved, we believe that the SGT will compete favorably with our competitors’ products in terms of:
|●||Safety, ease of use and utility: Unlike our competitors’ products, the SGT is non-invasive. It provides a simple, pain-free method for testing glucose levels, and avoids the risk of infection that accompanies blood glucose monitoring systems that require a finger prick.|
|●||Cost: Based on our knowledge of the glucose monitoring industry, and our projections of the cost of manufacturing the SGB as discussed elsewhere in this prospectus, we believe the cost of testing using the SGT will be comparable to the cost of testing using currently commercialized glucose monitoring systems.|